Holemaking
Showing 45901–45950 of 47158 results
-
-
-
YG-1 5.5 mm Dia. 140 Carbide TiAlN 20XD Coolant Thru Drill
5.50MM CARBIDE DRILL MQL TYPE W/ COOLANT (20XD)
-
HAM 10.9 mm Dia. 140 TA-CN Coolant Thru Drill
10.90 mm 8XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
YG-1 0.9688 Dia. Series 2 Flanged Straight Shank-Straight Flute Spade Holder
SERIES 2 FLANGED STRAIGHT SHANK / FLUTE SHORT LENGTH HOLDER
-
YG-1 3.9 mm Dia. 140 Carbide TiAlN 30XD Coolant Thru Drill
3.90MM CARBIDE DREAM DRILLS MQL TYPE W/ COOLANT HOLES (30XD)
-
-
Tungaloy 0.5312 Dia. 5XD Indexable Insert Drill
0.531″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
-
-
Tungaloy 0.2402 Dia. TiAlN DMP Drill Head
0.2402″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
Iscar 0.386 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.386″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
-
-
-
YG-1 0.1875 Dia. 135 Cobalt TiN Straight Shank Jobber Non-Coolant Thru Drill
3/16 HSS(M42) JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
ZCC 1536SU05C-0460 KDG303 0.1811 Dia. 140 TIALN 5XD Coolant Thru Drill
0.1811 DIA CARBIDE COOLANT DRILL
-
-
-
-
-
-
HAM 3.9 mm Dia. 120 Bright Non-Coolant Thru Drill
3.90 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
-
-
-
-
Iscar 0.7992 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.799″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
YG-1 6.5 mm Dia. 118 Carbide DLC 5XD Coolant Thru Drill
6.50MM CARBIDE DREAM DRILL FOR ALUMINUM W/ COOLANT (5XD) – METRIC
-
-
-
Iscar 1.4375 Dia. 2XD Indexable Square Insert Coolant Thru Drill
1.437″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
-
Ingersoll 0.4331 Dia. 140 1.5XD Replaceable Tipped Drill Body Coolant Thru
0.4331 (11.000 mm)-0.4685 (11.900 mm) GoldTwist Body
-
-
-
-
-
YG-1 0.3150 Dia. 130 TiN Jobber Non-Coolant Thru Drill
8.0MM HSS-EX HPD-SUS TWIST DRILL TiN-COATED (JOBBERS)
-
-
-
Ingersoll 0.622 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.6220 (15.80 mm) QwikTwist Tip Carbide
-
HAM 11.8 mm Dia. 137 TA-C Coolant Thru Drill
11.80 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Iscar 0.3125 Dia. TiAlN 3XD Coolant Thru Drill
0.312″ DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 3xD
-
-
Ingersoll 0.9062 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.906 (23.01 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
YG-1 18.7 mm Dia. 140 Carbide TiAlN 5XD Non-Coolant Thru Drill
18.70MM CARBIDE DREAM DRILL (5XD) – METRIC