Holemaking
Showing 4451–4500 of 47158 results
-
YG-1 5.2 mm Dia. 140 Carbide TiAlN 10XD Coolant Thru Drill
5.20MM CARBIDE DRILL MQL TYPE W/ COOLANT (10XD)
-
-
-
HAM 7.8 mm Dia. 140 TA-C Coolant Thru Drill
7.80 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
Iscar 0.563 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.563″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
Tungaloy 0.9921 Dia. TiAlN DMP Drill Head
0.9921″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
-
Ingersoll 2 Dia. Bright BTA Brazed STS Coolant Thru
2 BTA Brazed|Single tube system|External 4-start thread|.496-2.559″ (12.6-65.0 mm)|
-
-
YG-1 0.5937 Dia. 118 HSS Oxide Morse Taper Shank Non-Coolant Thru Drill
19/32 HSS(M2) MORSE TAPER SHANK TWIST DRILLS
-
-
-
-
-
-
YG-1 0.7031 Dia. 118 HSS Black-Gold Silver/ Deming Non-Coolant Thru Drill
45/64 HSS(M2) 118 DEGREE SPLIT POINT 3 FLAT GOLD & BLACK S & D DRILL
-
-
YG-1 12 mm Dia. 140 Carbide TiCN 3XD, 5XD, 7XD Drill Insert Coolant Thru
12.00MM I-DREAMDRILL Insert INOX TICN-COATED #A
-
-
Iscar 0.625 Dia. Gundrill Coolant Thru
5/8″ Gundrills Carrying Triangular Inserts Featuring 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
-
YG-1 3.6875 Dia. 144 HSS Hardslick Throw Away Drill Insert
3-11/16 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
YG-1 13.4 mm Dia. 140 Carbide TiAlN 10XD Coolant Thru Drill
13.40MM CARBIDE DRILL MQL TYPE W/ COOLANT (10XD)
-
YG-1 0.6250 Dia. 132 Carbide Hardslick Throw Away Drill Insert
5/8 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
YG-1 0.4531 Dia. 118 Carbide TiAlN Jobber Non-Coolant Thru Drill
29/64 CARBIDE JOBBER LENGTH TWIST DRILL TIALN COATED
-
YG-1 0.3906 Dia. 130 Cobalt Bright Parabolic Taper Non-Coolant Thru Drill
25/64 HSSCo5 PARABOLIC FLUTE TAPER LENGTH STRAIGHT SHANK DRILL
-
YG-1 1.0469 Dia. 132 Cobalt Hardslick Throw Away Drill Insert
1-3/64 PREMIUM COBATL(M48) THROW-AWAY DRILL InsertS HARDSLICK COATED
-
YG-1 4.0000 Dia. 144 HSS TiAlN Throw Away Drill Insert
4.000 HSS(M4) THROW AWAY DRILL Insert TIALN-COATED
-
HAM 7.14 mm Dia. 137 TA-C Coolant Thru Drill
9/32″ 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
HAM 4.8 mm Dia. 137 TA-C Coolant Thru Drill
4.80 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
Tungaloy 5 mm Dia. TiAlN 5XD Coolant Thru Drill
5 mm GigaJetDrill series with coolant hole, L/D=5, dia=3.0 – 20.0mm
-
-
YG-1 3.5313 Dia. 144 HSS Hardslick Throw Away Drill Insert
3-17/32 SUPER HSS(T15) THROW-AWAY DRILL Insert HARDSLICK COATED
-
YG-1 4.4375 Dia. 144 HSS Hardslick Throw Away Drill Insert
4-7/16 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
HAM 10.4 mm Dia. 137 TA-C Coolant Thru Drill
10.40 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Ingersoll 1.875 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.875 (47.63 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
Ingersoll 0.2756 Dia. 140 1.5XD Replaceable Tipped Drill Body Coolant Thru
0.2756 (7.0 mm)-0.2913 (7.4 mm) GoldTwist Body
-
-
-
Iscar 0.3150 in or 8.0010 mm Cham Mill Carbide Tialn 6 Flute End Mill
Size: 0.315″ x 0.984″ x 0.551″ x 1.677″
-
-
-
-
