Holemaking
Showing 44901–44950 of 47158 results
-
Ingersoll 0.6263 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
0.626 (15.90 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
-
HAM 4.7 mm Dia. 137 TA-C Coolant Thru Drill
4.70 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Iscar 0.7756 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.776″ DCM Drill Heads for Cast Iron
-
-
Ingersoll 0.4133 Dia. 140 8XD Replaceable Tipped Drill Body Coolant Thru
0.4134 (10.5 mm)-0.4291 (10.9 mm) GoldTwist Body
-
YG-1 0.1570 Dia. 135 Cobalt TiN Parabolic Screw Machine Non-Coolant Thru Drill
#22 HSS(M35) SCREW MACHINE PARABOLIC TIN COATED DRILL
-
YG-1 18.4 mm Dia. 140 Carbide TiAlN 5XD Non-Coolant Thru Drill
18.40MM CARBIDE DREAM DRILL (5XD) – METRIC
-
-
Ingersoll 1.8504 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.850 (47.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
YG-1 1.1719 Dia. 118 HSS Oxide Morse Taper Shank Non-Coolant Thru Drill
1-11/64 HSS(M2) MORSE TAPER SHANK TWIST DRILLS
-
-
-
-
-
-
-
Tungaloy 0.5625 Dia. 5XD Indexable Insert Drill
0.562″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
-
Ingersoll 0.5781 Dia. Bright BTA Brazed STS Coolant Thru
0.578 BTA Brazed|Single tube system – crosshole|External 4-start thread|.496-.787″ (12.6-20 mm)|
-
-
-
Iscar 0.9844 Dia. Tube Coolant Thru Drill
0.984″ Deep Single Tube Drills with Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
Tungaloy 0.9527 Dia. TiAlN DMP Drill Head
0.9527″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
-
Ingersoll 0.311 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.3110 (7.90 mm) QwikTwist Tip Carbide
-
YG-1 14 mm Dia. 140 Carbide TiAlN 10XD Coolant Thru Drill
14.00MM CARBIDE DREAM DRILLS MQL TYPE W/ COOLANT HOLES (10XD)
-
-
-
Iscar 0.4134 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.413″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
YG-1 0.2205 Dia. 135 Cobalt TiN Straight Shank Jobber Non-Coolant Thru Drill
5.6 HSS-Co5% JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
-
-
-
HAM 5.4 mm Dia. 140 TA-C Non-Coolant Thru Drill
5.40 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
-
Ingersoll 1.0118 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.0118 (25.70 mm) SpadeTwist Tip
-
-
-
Iscar 2.2187 Dia. 2XD Indexable Square Insert Coolant Thru Drill
2.219″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
HAM 1.2 mm Dia. 135 TA Coolant Thru Drill
1.20 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
-
-
-
Iscar 0.3898 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.390″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
YG-1 0.9375 Dia. 132 HSS TiN Throw Away Drill Insert
15/16 HSS(M4) THROW AWAY DRILL Insert TIN-COATED