Holemaking
Showing 44701–44750 of 47158 results
-
-
-
-
YG-1 105.99 mm Dia. 144 Cobalt Hardslick Throw Away Drill Insert
106.00MM PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
-
-
HAM 5.16 mm Dia. 140 TA-C Non-Coolant Thru Drill
13/64″ 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
Iscar 0.3465 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.346″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
-
-
Ingersoll 1.6875 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.687 (42.85 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.3976 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.398″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
-
-
Tungaloy 11 mm Dia. TiAlN 3XD Non-Coolant Thru Drill
11 mm GigaPowerDrill series without coolant hole, L/D=3, dia=3.0 – 16.0mm
-
-
-
-
-
HAM 6.75 mm Dia. 137 TA-C Coolant Thru Drill
17/64″ 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
YG-1 0.7187 Dia. Flat HSS TiAlN Throw Away Drill Insert
23/32 SUPER HSS (T15) FLAT BOTTOM DRILL Insert TIALN COATED
-
YG-1 4.9 mm Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
4.90MM DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
-
-
-
-
-
-
HAM 10.2 mm Dia. 120 Bright Non-Coolant Thru Drill
10.20 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
YG-1 6 mm Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
6.00MM DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
-
HAM 11.6 mm Dia. 137 TA-C Coolant Thru Drill
11.60 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
-
-
-
-
-
Iscar 0.5937 Dia. Tube Coolant Thru Drill
0.595″ Deep Single Tube Drills with External 2 and 4 Start Thread and 2 or 3 Brazed Tips (.496-2.559 dia.)
-
-
-
-