Holemaking
Showing 4401–4450 of 47158 results
-
YG-1 2.0469 Dia. 132 HSS Hardslick Throw Away Drill Insert
2-3/64 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
-
-
YG-1 6.3 mm Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
6.30MM CARBIDE DREAM DRILL W/ COOLANT (3XD) – METRIC
-
-
Ingersoll 0.748 Dia. 140 5XD Replaceable Tipped Drill Body Coolant Thru
0.7480 (19.000 mm)-0.7835 (19.900 mm) GoldTwist Body
-
YG-1 0.332 Dia. 140 Carbide TiAlN+TiN 5XD Coolant Thru Drill
.3320 CARBIDE DREAM DRILL HIGH FEED 5XD W/ COOLANT HOLE SLOT (H-COATING)
-
Iscar 0.3976 Dia. Carbide TiAlN+TiN Exchangeable Drill Heads Coolant Thru
.398″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
-
-
-
Iscar 0.689 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.689″ Exchangeable 3 Flute Drilling Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
-
Tungaloy 0.6875 Dia. 2XD Indexable Insert Drill
0.687″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
-
HAM 2.6 mm Dia. 120 TA Non-Coolant Thru Drill
2.60 mm Solid Carbide Twist Drill, 2 Flute, TA Coated, Non-Coolant
-
-
YG-1 12.6 mm Dia. 140 Carbide TiAlN 3XD Non-Coolant Thru Drill
12.60MM CARBIDE DREAM DRILL W/O COOLANT HOLES (3XD)
-
Ingersoll 0.7874 Dia. 140 3.5XD Replaceable Tipped Drill Body Coolant Thru
.7874-.8228 QwikTwist Body
-
-
Ingersoll 1.5 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.500 (38.10 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Ingersoll 0.2677 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.2680 (6.81 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|
-
YG-1 1.9688 Dia. 132 HSS Hardslick Throw Away Drill Insert
1-31/32 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
HAM 2.5 mm Dia. 130 Bright Non-Coolant Thru Drill
2.50 mm Solid Carbide Twist Drill, 2 Flutes, AMS Geometry, Bright, Non-Coolant
-
Ingersoll 1.125 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.125 (28.58 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
YG-1 0.5000 Dia. 118 Carbide TiAlN Jobber Non-Coolant Thru Drill
1/2 CARBIDE JOBBER LENGTH TWIST DRILL TIALN COATED
-
YG-1 0.3437 Dia. 140 Carbide TiAlN+TiN 5XD Coolant Thru Drill
11/32 CARBIDE DREAM DRILL HIGH FEED 5XD W/ COOLANT HOLE SLOT (H-COATING)
-
-
-
YG-1 1.5 mm Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
1.50MM CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
-
-
HAM 5 mm Dia. 120 Bright Non-Coolant Thru Drill
5.00 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
-
-
-
HAM 2.35 mm Dia. 135 TA Coolant Thru Drill
2.35 mm 8XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
-
HAM 10.9 mm Dia. 140 TA-C Non-Coolant Thru Drill
10.90 mm 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
HAM 12.6 mm Dia. 140 TA-CN Coolant Thru Drill
12.60 mm 8XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
YG-1 1.0000 Dia. 132 Carbide TiN Throw Away Drill Insert
1.000 CARBIDE (C5) THROW-AWAY DRILL Insert TIN-COATED
-
-
Mikron 2.95 mm Dia. TiAlN + TiN Carbide 3XD Pilot Coolant Thru Drill
2.95MM PILOT DRILL 3XD TIALN+TIN
-
HAM 9.8 mm Dia. 137 TA-C Coolant Thru Drill
9.80 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Iscar 0.9331 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.933″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
-
YG-1 3.5625 Dia. 144 HSS TiAlN Throw Away Drill Insert
3-9/16 HSS(M4) THROW AWAY DRILL Insert TIALN-COATED
-
Ingersoll 0.9016 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.9016 (22.90 mm) Gold Twist Replaceable Tips|Stainless Steel & Exoti