Holemaking
Showing 44151–44200 of 47158 results
-
-
-
-
-
-
YG-1 9.6 mm Dia. 140 Carbide TiAlN 8XD Coolant Thru Drill
9.60MM CARBIDE DREAM DRILL INOX W/ COOLANT (8XD)
-
YG-1 11 mm Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
11.00MM DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
-
Ingersoll 0.3976 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.3976 (10.10 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|
-
YG-1 0.4219 Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
27/64 CARBIDE DREAM DRILL W/ COOLANT HOLES(5XD)
-
Iscar 0.8031 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.803″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
-
Iscar 1.2992 Dia. Tube Counterbore Coolant Thru
1.311″ Deep Single Tube Counterbore with Through Hole, External 4 Start Thread and a Brazed Tip (.744-2.559 dia.)
-
-
YG-1 9.6 mm Dia. 140 Carbide TiAlN+TiN 3XD Coolant Thru Drill
9.60MM CARBIDE DREAM DRILL HIGH FEED 3XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
Ingersoll 0.5709 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.571 (14.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
Ingersoll 0.9645 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.9645 (24.50 mm) Gold Twist Replaceable Flat Bottom Tips|Steel & Gen
-
HAM 6.8 mm Dia. 140 TA Coolant Thru Drill
6.80 mm 3XD Solid Carbide Multi Drill, 2 Straight Flutes, TA Coated, Coolant Thru
-
-
HAM 14.5 mm Dia. 140 TA-C Coolant Thru Drill
14.50 mm 8XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 0.9724 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.972″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
YG-1 0.2969 Dia. 135 Cobalt Split Point Aircraft Non-Coolant Thru Drill
19/64 HSSCo5 6″ AIRCRAFT EXTENSION DRILL 135 DEGREE SPLIT POINT COLORING
-
-
HAM 3.5 mm Dia. 140 TA-C Non-Coolant Thru Drill
3.50 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
Ingersoll 1.5354 Dia. Bright BTA STS Tubes Coolant Thru
1.535 BTA STS Tubes|Single tube system|.433-2.205″ (11.0-56 mm)|
-
-
-
YG-1 3.7 mm Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
3.70MM CARBIDE DREAM DRILL W/ COOLANT (3XD) – METRIC
-
-
-
-
-
-
Iscar 0.6732 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.673″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
-
-
-
Tungaloy 1.2500 Dia. 4XD Indexable Insert Drill
1-1/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
-
YG-1 11.2 mm Dia. 140 Carbide TiAlN 10XD Coolant Thru Drill
11.20MM CARBIDE DRILL MQL TYPE W/ COOLANT (10XD)
-
-
-
-
YG-1 14.5 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
14.50MM CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
Ingersoll 0.5433 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.5433 (13.80 mm) QwikTwist Tip Carbide
-
Iscar 0.5984 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.598″ Exchangeable 3 Flute Drilling Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
-
Tungaloy 0.3465 Dia. TiAlN DMP Drill Head
0.3464″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.