Holemaking
Showing 43551–43600 of 47158 results
-
-
-
Ingersoll 0.3543 Dia. 140 5XD Replaceable Tipped Drill Body Coolant Thru
0.3543 (9.0 mm) QwikTwist Body
-
YG-1 3.1250 Dia. 144 HSS Hardslick Throw Away Drill Insert
3-1/8 SUPER HSS(T15) THROW-AWAY DRILL Insert HARDSLICK COATED
-
YG-1 3.0000 Dia. 144 HSS Hardslick Throw Away Drill Insert
3.000 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
YG-1 22 mm Dia. 132 HSS Hardslick Throw Away Drill Insert
22.00MM SUPER HSS(T15) THROW-AWAY DRILL Insert HARDSLICK COATED
-
Ingersoll 0.3543 Dia. 140 3XD Replaceable Tipped Drill Body Coolant Thru
0.3543 (9.0 mm)-0.3701 (9.4 mm) GoldTwist Body
-
HAM 11 mm Dia. 135 TA Coolant Thru Drill
11.00 mm 5XD Solid Carbide Multi Drill, 2 Straight Flutes, TA Coated, Coolant Thru
-
Ingersoll 1.5938 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.594 (40.49 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 41 mm Dia. 2XD Indexable Insert Drill
41mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
-
-
Tungaloy 0.3906 Dia. TiAlN 3XD Coolant Thru Drill
0.3906″ GigaJetDrill series with coolant hole, L/D=3
-
-
Iscar 0.386 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.386″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
Iscar 0.8346 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.835″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
-
-
-
-
-
YG-1 0.6562 Dia. 132 Cobalt TiN Throw Away Drill Insert
21/32 PREMIUM COBALT(M48) THROW AWAY DRILL InsertS TIN COATED
-
-
-
-
HAM 10.2 mm Dia. 137 TA-C Coolant Thru Drill
10.20 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
HAM 13.5 mm Dia. 137 TA-C Coolant Thru Drill
13.50 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Ingersoll 0.8268 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.827 (21.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Iscar 0.8504 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.850″ General Use DCM Drill Heads
-
-
HAM 13.3 mm Dia. 137 TA-C Coolant Thru Drill
13.30 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Tungaloy 49 mm Dia. 2XD Indexable Insert Drill
49mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
YG-1 5.2 mm Dia. 140 Carbide TiAlN 15XD Coolant Thru Drill
5.20MM CARBIDE DRILL MQL TYPE W/ COOLANT (15XD)
-
Tungaloy 0.4606 Dia. TiAlN DMP Drill Head
0.4606″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
YG-1 78 mm Dia. 144 HSS Hardslick Throw Away Drill Insert
78.00MM SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
HAM 18.5 mm Dia. 140 TA-CN Non-Coolant Thru Drill
18.50 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
-
-
-
YG-1 3.6250 Dia. 144 HSS TiN Throw Away Drill Insert
3-5/8 HSS(M4) THROW AWAY DRILL Insert TIN-COATED
-
YG-1 2.1875 Dia. 132 Cobalt Hardslick Throw Away Drill Insert
2-3/16 PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
YG-1 0.413 Dia. 135 Cobalt Split Point Aircraft Non-Coolant Thru Drill
Z HSSCo5 12″ AIRCRAFT EXTENSION DRILL 135 DEGREE SPLIT POINT COLORING