Holemaking
Showing 41701–41750 of 47158 results
-
-
-
-
YG-1 19.7 mm Dia. 140 Carbide TiAlN 5XD Non-Coolant Thru Drill
19.70MM CARBIDE DREAM DRILL (5XD) – METRIC
-
YG-1 1.7812 Dia. 132 Carbide TiAlN Throw Away Drill Insert
1-25/32 CARBIDE (C5) THROW-AWAY DRILL Insert TIALN-COATED
-
-
-
Iscar 0.3307 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.331″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
-
-
-
YG-1 0.1820 Dia. 118 Carbide Bright Jobber Twist Non-Coolant Thru Drill
#14 CARBIDE JOBBER LENGTH TWIST DRILL
-
-
-
-
Iscar 1.2992 Dia. Tube Counterbore Coolant Thru
1.311″ Deep Single Tube Counterbore with Through Hole, External 4 Start Thread and a Brazed Tip (.744-2.559 dia.)
-
YG-1 0.0995 Dia. 135 HSS TiN Straight Shank Jobber Non-Coolant Thru Drill
#39 HSS(M2) JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
Ingersoll 0.6063 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.6063 (15.40 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera
-
-
-
YG-1 16 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
16.00MM CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
-
-
-
-
-
-
HAM 12.6 mm Dia. 140 TA-C Coolant Thru Drill
12.60 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 0.2969 Dia. 135 HSS Split Point Aircraft Non-Coolant Thru Drill
19/64 HSS 12″ AIRCRAFT EXTENSION DRILL 135 DEGREE SPLIT POINT STEAM HOMO
-
-
YG-1 16.5 mm Dia. 140 Carbide TiAlN+TiN 5XD Coolant Thru Drill
16.50MM CARBIDE DREAM DRILL HIGH FEED 5XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
YG-1 7.4 mm Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
7.40MM DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
-
HAM 13.3 mm Dia. 140 TA-CN Coolant Thru Drill
13.30 mm 5XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
Tungaloy 3 mm Dia. TiAlN 2XD Non-Coolant Thru Drill
3 mm GigaPowerDrill series without coolant hole, L/D=2, dia=3.0 – 16.0mm
-
HAM 16.67 mm Dia. 140 TA-C Non-Coolant Thru Drill
21/32″ 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
-
HAM 5.6 mm Dia. 120 TA Non-Coolant Thru Drill
5.60 mm Solid Carbide Twist Drill, 2 Flute, TA Coated, Non-Coolant
-
-
-
-
-
-
-
-
Ingersoll 1.5312 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.531 (38.89 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
Iscar 0.8661 Dia. Carbide TiAlN+TiN Exchangeable Drill Heads Coolant Thru
.866″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
-
HAM 3.5 mm Dia. 137 TA-C Coolant Thru Drill
3.50 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru