Holemaking
Showing 40951–41000 of 47158 results
-
-
-
YG-1 15 mm Dia. 140 Carbide TiAlN+TiN 5XD Coolant Thru Drill
15.00MM CARBIDE DREAM DRILL HIGH FEED 5XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
-
Iscar 0.6496 Dia. Drill Tube System Coolant Thru
.650 – .679″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
Tungaloy 6.2 mm Dia. TiAlN 5XD Coolant Thru Drill
6.2 mm GigaJetDrill series with coolant hole, L/D=5, dia=3.0 – 20.0mm
-
-
YG-1 3.6 mm Dia. 140 Carbide TiAlN 10XD Coolant Thru Drill
3.60MM CARBIDE DRILL MQL TYPE W/ COOLANT (10XD)
-
-
-
-
-
YG-1 17 mm Dia. 132 HSS TiN Throw Away Drill Insert
17.00MM SUPER HSS(T15) THROW AWAY DRILL Insert TIN-COATED
-
HAM 15.4 mm Dia. 140 TA-C Coolant Thru Drill
15.40 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
HAM 11.7 mm Dia. 140 TA-CN Non-Coolant Thru Drill
11.70 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
-
-
-
-
-
-
YG-1 0.6250 Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
5/8 CARBIDE DREAM DRILL INOX W/ COOLANT (5XD)
-
HAM 8.7 mm Dia. 120 TA Non-Coolant Thru Drill
8.80 mm Solid Carbide Twist Drill, 2 Flute, TA Coated, Non-Coolant
-
HAM 1 mm Dia. 120 Bright Non-Coolant Thru Drill
1.00 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
HAM 8.6 mm Dia. 137 TA-C Coolant Thru Drill
8.70 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Tungaloy 2.0000 Dia. 4XD Indexable Insert Drill
2″ TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Tungaloy 20.5 mm Dia. 2XD Indexable Insert Drill
20.5mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
-
-
YG-1 17.3 mm Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
17.30MM CARBIDE DREAM DRILL INOX W/ COOLANT (3XD)
-
-
HAM 7.5 mm Dia. 137 TA-C Coolant Thru Drill
7.50 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
YG-1 0.1406 Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
9/64 CARBIDE DREAM DRILL INOX W/ COOLANT (3XD)
-
-
Iscar 5.3543 Dia. Tube Drill System Coolant Thru
5.354-5.826″ Double-Tube Drill System with 4 Start Thread Connection Outer Tubes
-
-
-
Iscar 0.8937 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.894″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
-
YG-1 0.4062 Dia. 135 Cobalt Split Point Aircraft Non-Coolant Thru Drill
13/32 HSSCo5 12″ AIRCRAFT EXTENSION DRILL 135 DEGREE SPLIT POINT COLORING
-
-
YG-1 20 mm Dia. 132 HSS Hardslick Throw Away Drill Insert
20.00MM HSS(M4) THROW-AWAY DRILL Insert HARDSLICK COATED
-
HAM 7.9 mm Dia. 137 TA-C Coolant Thru Drill
7.90 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Iscar 1.2598 Dia. Tube Coolant Thru Drill
1.26″ Deep Single Tube Drills with Internal Single Start Thread (.984-2.559 dia.)
-
-
Ingersoll 1.8125 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.813 (46.05 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
YG-1 0.5312 Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
17/32 CARBIDE DREAM DRILL W/ COOLANT HOLES(3XD)
-
YG-1 5.8 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
5.80MM CARBIDE DREAM DRILL INOX W/ COOLANT (5XD)