Holemaking
Showing 40351–40400 of 47158 results
-
Iscar 0.8701 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.870″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
-
-
-
-
YG-1 11 mm Dia. 132 HSS Hardslick Throw Away Drill Insert
11.00MM SUPER HSS(T15) THROW AWAY DRILL Insert HARDSLICK COATED
-
-
-
-
-
Tungaloy 1.5625 Dia. 5XD Indexable Insert Drill
1.562″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
-
-
-
-
Ingersoll 0.7676 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.7500 (19.05 mm) STEEL UP TO 45 HRc/IRON
-
-
-
HAM 10.4 mm Dia. 140 TA-C Non-Coolant Thru Drill
10.40 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
-
Iscar 8.6614 Dia. Drill Tube System Coolant Thru
8.661 – 9.133″ Drill Tubes – STS System – Inner 4 Start Thread Connection
-
-
-
-
-
-
-
-
-
Iscar 0.6181 Dia. Carbide TiAlN+TiN Exchangeable Drill Heads Coolant Thru
.618″ Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)
-
-
HAM 4.2 mm Dia. 130 Bright Non-Coolant Thru Drill
4.20 mm Solid Carbide Twist Drill, 2 Flutes, AMS Geometry, Bright, Non-Coolant
-
-
YG-1 10 mm Dia. 132 Carbide Hardslick Throw Away Drill Insert
10.00MM CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
YG-1 1.5625 Dia. 132 Carbide TiAlN Throw Away Drill Insert
1-9/16 CARBIDE (C5) SM POINT THROW-AWAY DRILL Insert TIALN-COATED
-
-
YG-1 0.0820 Dia. 135 Powder Metal TiAlN Non-Coolant Thru Drill
#45 HSS-PM MULTI-1 DRILL STUB LENGTH TIALN COATED
-
-
-
-
-
-
-
-
-
-
HAM 8.3 mm Dia. 140 TA-C Non-Coolant Thru Drill
8.30 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
HAM 4.3 mm Dia. 140 TA-C Non-Coolant Thru Drill
4.30 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
YG-1 1.0156 Dia. 132 HSS Hardslick Throw Away Drill Insert
1-1/64 HSS(M4) THROW-AWAY DRILL Insert HARDSLICK COATED
-
Ingersoll 1.693 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.693 (43.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|