Holemaking
Showing 40151–40200 of 47158 results
-
-
-
Iscar 0.7834 Dia. Carbide TiAlN+TiN Exchangeable Drill Heads Coolant Thru
.783″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
Iscar 0.9844 Dia. Tube Counterbore Coolant Thru
0.984″ Deep Single Tube Counterbore with Through Hole, Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
Ingersoll 1.2992 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.2992 (33.00 mm) SpadeTwist Tip
-
Iscar 1.0039 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
1.004″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
HAM 20 mm Dia. 140 TA-CN Coolant Thru Drill
20.00 mm 8XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-
-
-
-
HAM 8.3 mm Dia. 137 TA-C Coolant Thru Drill
8.30 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
HAM 10.1 mm Dia. 137 TA-C Coolant Thru Drill
10.10 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
-
Tungaloy 24.5 mm Dia. 4XD Indexable Insert Drill
24.5mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
YG-1 12 mm Dia. 140 Carbide TiAlN 5XD Non-Coolant Thru Drill
12.00MM CARBIDE DREAM DRILL (5XD) – METRIC
-
-
-
YG-1 1.8125 Dia. 132 Carbide TiAlN Throw Away Drill Insert
11-13/16 CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
-
-
-
-
YG-1 0.3701 Dia. 130 TiN Stub Non-Coolant Thru Drill
9.4MM HSS-EX HPD-SUS TWIST DRILL TiN-COATED (STUB)
-
YG-1 1.0313 Dia. 132 Cobalt TiN Throw Away Drill Insert
1-1/32 PREMIUM COBALT(M48) THROW AWAY DRILL InsertS TIN COATED
-
-
-
-
-
-
-
-
YG-1 20 mm Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
20.00MM CARBIDE DREAM DRILL INOX W/ COOLANT (3XD)
-
YG-1 3.0000 Dia. 144 Cobalt Hardslick Throw Away Drill Insert
3.000 PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
-
-
-
Ingersoll 1.625 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.625 (41.28 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
YG-1 15.3 mm Dia. 140 Carbide TiAlN+TiN 3XD Coolant Thru Drill
15.30MM CARBIDE DREAM DRILL HIGH FEED 3XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
YG-1 0.0781 Dia. 60 HSS Bright Center Non-Coolant Thru Drill
5/64 HSS(M2) 60 DEGREE POINT LONG LENGTH CENTER DRILL
-
YG-1 114 mm Dia. 144 HSS TiAlN Throw Away Drill Insert
114.00MM SUPER HSS(T15) SM POINT THROW-AWAY DRILL Insert TIALN COATED
-
-
Tungaloy 33 mm Dia. 3XD Indexable Insert Drill
33mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-