Holemaking
Showing 38801–38850 of 47158 results
-
-
-
-
-
-
-
-
Tungaloy 1.5000 Dia. 5XD Indexable Insert Drill
1-1/2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
HAM 12.6 mm Dia. 137 TA-C Coolant Thru Drill
12.60 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
YG-1 3.0937 Dia. 144 Cobalt Hardslick Throw Away Drill Insert
3-3/32 PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
YG-1 1.7812 Dia. 132 Carbide TiAlN Throw Away Drill Insert
1-25/32 CARBIDE (C5) THROW-AWAY DRILL Insert TIALN-COATED
-
-
-
-
-
-
-
Tungaloy 1.2500 Dia. 3XD Indexable Insert Drill
1-1/4″ TungSix-Drill Indexable insert drills, L/D=3, Whistle notch
-
Tungaloy 0.7283 Dia. TiAlN DMP Drill Head
0.7283″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
YG-1 3.6250 Dia. 144 HSS TiAlN Throw Away Drill Insert
3-5/8 SUPER HSS(T15) SM POINT THROW-AWAY DRILL Insert TIALN COATED
-
HAM 4.37 mm Dia. 137 TA-C Coolant Thru Drill
11/64″ 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
-
HAM 16 mm Dia. 135 Bright Coolant Thru Drill
16.00 mm 5XD Solid Carbide Multi Drill, 2 Straight Flutes, Bright, Coolant Thru
-
-
-
YG-1 0.2950 Dia. 135 Cobalt Bright Screw Machine Non-Coolant Thru Drill
M HSS(M42) SCREW MACHINE DRILL
-
YG-1 0.3906 Dia. 132 Carbide Hardslick Throw Away Drill Insert
25/64 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
HAM 12 mm Dia. 140 TA-CN Coolant Thru Drill
12.00 mm 8XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-
-
-
YG-1 0.5000 Dia. 132 Cobalt Hardslick Throw Away Drill Insert
1/2 PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
Ingersoll 0.3819 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.3819 (9.70 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|
-
-
Ingersoll 0.6574 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
0.657 (16.69 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
-
Iscar 3.1496 Dia. Tube Coolant Thru Drill
3.15″ Deep Single Tube Drills with External 4 Start Thread and Cartridges (1.142-9.173 dia.)
-
Tungaloy 1.4375 Dia. 2XD Indexable Insert Drill
1.437″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
Tungaloy 1.9375 Dia. 3XD Indexable Insert Drill
1.937″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
Tungaloy 23.5 mm Dia. 5XD Indexable Insert Drill
23.5mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Ingersoll 1.5938 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.594 (40.49 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-