Holemaking
Showing 38751–38800 of 47158 results
-
Iscar 0.5551 Dia. Tube Coolant Thru Drill
0.556″ Deep Single Tube Drills with External 2 and 4 Start Thread and 2 or 3 Brazed Tips (.496-2.559 dia.)
-
-
-
-
YG-1 0.2812 Dia. 130 Cobalt TiCN Parabolic Taper Non-Coolant Thru Drill
9/32 HSSCo5 PARABOLIC FLUTE TAPER LENGTH STRAIGHT SHANK DRILL TICN COATED
-
-
-
-
-
YG-1 0.2677 Dia. 135 Cobalt TiN Straight Shank Jobber Non-Coolant Thru Drill
6.8 HSS-Co5% JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
-
-
YG-1 13.5 mm Dia. 132 HSS Hardslick Throw Away Drill Insert
13.50MM SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
-
YG-1 0.9375 Dia. 132 HSS TiN Throw Away Drill Insert
15/16 HSS(M4) THROW AWAY DRILL Insert TIN-COATED
-
-
Iscar 1.4252 Dia. Drill Tube System Coolant Thru
1.426 – 1.559″ Drill Tubes – STS System – Inner 4 Start Thread Connection
-
YG-1 18 mm Dia. 132 HSS TiN Throw Away Drill Insert
18.00MM SUPER HSS(T15) THROW AWAY DRILL Insert TIN-COATED
-
HAM 7.6 mm Dia. 137 TA-C Coolant Thru Drill
7.60 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
YG-1 6 mm Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
6.00MM CARBIDE DREAM DRILL W/ COOLANT (3XD) – METRIC
-
Iscar 0.9213 Dia. Carbide TiAlN Exchangeable Self-Centering Drill Head Coolant Thru
.921″ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
-
YG-1 42 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
42.00MM CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
-
-
Ingersoll 1.5625 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.562 (39.67 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
HAM 19.45 mm Dia. 140 TA-CN Coolant Thru Drill
49/64″ 5XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-
-
YG-1 1.1250 Dia. 132 Carbide TiN Throw Away Drill Insert
1-1/8 CARBIDE (C2) THROW-AWAY DRILL Insert TiN-COATED
-
-
Iscar 1.2401 Dia. Carbide TiAlN Exchangeable Self-Centering Drill Head Coolant Thru
1.240″ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
-
YG-1 0.4375 Dia. 132 HSS Hardslick Throw Away Drill Insert
7/16 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
HAM 12.4 mm Dia. 90 TA Non-Coolant Thru Drill
12.40 mm Solid Carbide Countersinker, 3 Flutes, TA Coated
-
-
-
Ingersoll 1.693 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.693 (43.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Ingersoll 0.4331 Dia. 140 3XD Replaceable Tipped Drill Body Coolant Thru
0.4331 (11.000 mm)-0.4488 (11.400 mm) GoldTwist Body
-
Iscar 0.4606 Dia. Carbide TiAlN Exchangeable Self-Centering Drill Head Coolant Thru
.461″ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron