Holemaking
Showing 2051–2100 of 47158 results
-
-
-
YG-1 2.3437 Dia. 132 HSS TiN Throw Away Drill Insert
2-11/32 HSS(M4) THROW AWAY DRILL Insert TIN-COATED
-
-
Iscar 0.2756 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.275″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
HAM 3.2 mm Dia. 130 Bright Non-Coolant Thru Drill
3.20 mm Solid Carbide Twist Drill, 2 Flutes, AMS Geometry, Bright, Non-Coolant
-
YG-1 12.7 mm Dia. 140 Carbide TiAlN 15XD Coolant Thru Drill
12.70MM CARBIDE DRILL MQL TYPE W/ COOLANT (15XD)
-
HAM 6.1 mm Dia. 140 TA-C Non-Coolant Thru Drill
6.10 mm 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
-
-
-
-
-
-
-
YG-1 49 mm Dia. 132 HSS Hardslick Throw Away Drill Insert
49.00MM SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
-
-
Iscar 1.4252 Dia. Tube Counterbore Coolant Thru
1.426″ Deep Double Tube Counterbore with a Through Hole, External 4 Start Thread and a Brazed Tip (.725-2.559 dia.)
-
-
-
-
-
YG-1 18.5 mm Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
18.50MM DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
HAM 17.46 mm Dia. 140 TA-C Coolant Thru Drill
11/16″ 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 0.2913 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.291″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
HAM 12.7 mm Dia. 140 TA-CN Non-Coolant Thru Drill
1/2″ 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
-
-
Ingersoll 0.5 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
0.500 (12.70 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
Tungaloy 0.4606 Dia. TiAlN DMC Drill Head
0.4606″ DrillMeister DMC Drill heads for indexable head drills for high accuracy drilling
-
HAM 0.8 mm Dia. 120 Bright Non-Coolant Thru Drill
0.80 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
-
-
Ingersoll 0.8465 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.847 (21.50 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
YG-1 3.9 mm Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
3.90MM CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
Tungaloy 0.5709 Dia. TiAlN DMP Drill Head
0.5709″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
-
HAM 6.9 mm Dia. 137 TA-C Coolant Thru Drill
6.90 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
HAM 18 mm Dia. 140 TA-CN Coolant Thru Drill
18.00 mm 5XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-
-
HAM 2.78 mm Dia. 135 TA-C Coolant Thru Drill
7/64″ 20XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
YG-1 0.7187 Dia. 118 HSS Oxide Morse Taper Shank Non-Coolant Thru Drill
23/32 HSS(M2) MORSE TAPER SHANK TWIST DRILLS
-
-
-
Ingersoll 1.4173 Dia. 140 3XD Replaceable Tipped Drill Body Coolant Thru
1.4173 (36.0 mm)-1.4528 (36.9 mm) SpadeTwist Body
-
Iscar 0.5984 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.598″ DCM Drill Heads for Cast Iron