Holemaking
Showing 8401–8450 of 47158 results
-
-
Ingersoll 0.3898 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.3898 (9.90 mm) QwikTwist Tip Carbide
-
Iscar 0.625 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.625″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
-
Iscar 1.1299 Dia. Tube Drill System Coolant Thru
1.13-1.22″ Double-Tube Drill System with 4 Start Thread Connection Outer Tubes
-
-
Iscar 0.0590 in or 1.4986 mm Countersink Carbide Tialn 2 Flute End Mill
Size: 0.059″ x 0.598″ x 0.61″ x 1.248″
-
-
-
HAM 7.9 mm Dia. 120 TA Non-Coolant Thru Drill
7.90 mm Solid Carbide Twist Drill, 2 Flute, TA Coated, Non-Coolant
-
-
YG-1 0.4882 Dia. 135 Cobalt TiN Straight Shank Jobber Non-Coolant Thru Drill
12.4 HSS-Co5% JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
-
-
-
YG-1 7.4 mm Dia. 140 Carbide TiAlN+TiN 5XD Coolant Thru Drill
7.40MM CARBIDE DREAM DRILL HIGH FEED 5XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
-
Mikron 5.56 mm Dia. TiAlN + TiN Carbide 3XD Pilot Coolant Thru Drill
5.56MM PILOT DRILL 3XD TIALN+TIN
-
YG-1 0.5937 Dia. 132 Cobalt Hardslick Throw Away Drill Insert
19/32 PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
YG-1 0.332 Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
.3320 CARBIDE DREAM DRILL INOX W/ COOLANT (5XD)
-
-
HAM 7.3 mm Dia. 137 TA-C Coolant Thru Drill
7.30 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Ingersoll 0.563 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
0.563 (14.30 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
-
-
-
-
YG-1 0.4062 Dia. 132 Carbide TiAlN Throw Away Drill Insert
13/32 CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
Iscar 0.4528 Dia. 33XD SUMOCHAM Inserts and Modular Shank Gundrill Non-Coolant Thru
0.453″ Indexable SUMOCHAM Inserts and Modular Shank Gundrills
-
-
-
YG-1 1.0313 Dia. 132 HSS Hardslick Throw Away Drill Insert
1-1/32 HSS(M4) THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
Ingersoll 0.813 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.813 (20.65 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 10.5 mm Dia. TiAlN 3XD Coolant Thru Drill
10.5 mm GigaJetDrill series with coolant hole, L/D=3, dia=3.0 – 20.0mm
-
Ingersoll 0.7795 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.7795 (19.80 mm) QwikTwist Tip Carbide
-
-
YG-1 7.1 mm Dia. 140 Carbide TiAlN 5XD Non-Coolant Thru Drill
7.10MM CARBIDE DREAM DRILL (5XD) – METRIC
-
-
YG-1 9.5 mm Dia. 140 Carbide TiAlN 10XD Coolant Thru Drill
9.50MM CARBIDE DRILL MQL TYPE W/ COOLANT (10XD)
-
-
YG-1 0.4062 Dia. 132 HSS TiAlN Throw Away Drill Insert
13/32 SUPER HSS(T15) THROW-AWAY DRILL Insert TIALN COATED
-
Iscar 0.7205 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.720″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
HAM 15.88 mm Dia. 135 TA Coolant Thru Drill
5/8″ 5XD Solid Carbide Multi Drill, 2 Straight Flutes, TA Coated, Coolant Thru
-
-
-
-
YG-1 0.4844 Dia. 132 Carbide TiN Throw Away Drill Insert
31/64 CARBIDE (C2) THROW-AWAY DRILL Insert TiN-COATED