Holemaking
Showing 7651–7700 of 47158 results
-
-
-
YG-1 13.3 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
13.30MM CARBIDE DREAM DRILL W/ COOLANT (5XD) – METRIC
-
-
-
-
-
-
-
Iscar 0.4882 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.488″ Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)
-
STI 15.08 mm Dia. 130 Bright Carbide 5-8XD Non-Coolant Thru Drill
15.08 MM DIA 3 FLUTE NON COOLANT BRIGHT
-
Iscar 0.9016 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.902″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
YG-1 12.5 mm Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
12.50MM CARBIDE DREAM DRILL W/ COOLANT (3XD) – METRIC
-
-
Iscar 0.7519 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.752″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
HAM 13.89 mm Dia. 137 TA-C Coolant Thru Drill
35/64″ 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
HAM 17 mm Dia. 140 TA-C Coolant Thru Drill
17.00 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Ingersoll 0.591 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.591 (15.01 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
YG-1 0.0935 Dia. 135 Cobalt Bright Screw Machine Non-Coolant Thru Drill
#42 HSS(M42) SCREW MACHINE DRILL
-
-
-
Tungaloy 0.7500 Dia. 2XD Indexable Insert Drill
3/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
YG-1 17.5 mm Dia. 132 Cobalt Hardslick Throw Away Drill Insert
17.50MM PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
HAM 11.1 mm Dia. 137 TA-C Coolant Thru Drill
11.10 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 8.749 Dia. Drill Tube System Coolant Thru
8.749 – 9.212″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
-
YG-1 0.4531 Dia. 132 Carbide TiAlN Throw Away Drill Insert
29/64 CARBIDE (C5) THROW-AWAY DRILL Insert TIALN-COATED
-
YG-1 1.9375 Dia. 132 Cobalt Hardslick Throw Away Drill Insert
1-15/16 PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
Iscar 0.4291 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.429″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
-
HAM 15.7 mm Dia. 140 TA-C Coolant Thru Drill
15.70 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Ingersoll 0.874 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.8740 (22.20 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera
-
-
-
-
-
STI 8.9 mm Dia. 130 Bright Carbide 5-8XD Non-Coolant Thru Drill
8.90 MM DIA 3 FLUTE NON COOLANT BRIGHT
-
-
-
Tungaloy 1.8750 Dia. 3XD Indexable Insert Drill
1-7/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
HAM 2.3 mm Dia. 120 Bright Non-Coolant Thru Drill
2.30 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
YG-1 110.01 mm Dia. 144 Cobalt Hardslick Throw Away Drill Insert
110.00MM PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
YG-1 12.4 mm Dia. 140 Carbide TiAlN+TiN 5XD Coolant Thru Drill
12.40MM CARBIDE DREAM DRILL HIGH FEED 5XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
HAM 10.4 mm Dia. 137 TA-C Coolant Thru Drill
10.40 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
HAM 15.4 mm Dia. 140 TA-C Coolant Thru Drill
15.40 mm 8XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru