Holemaking
Showing 6651–6700 of 47158 results
-
-
Ingersoll 0.8701 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.8701 (22.10 mm) QwikTwist Tip Carbide
-
-
Tungaloy 1.1220 Dia. TiAlN SMP Drill Head
1.122″ DrillForceMeister SMP Drill heads for indexable head drill
-
Ingersoll 0.8661 Dia. 140 5XD Replaceable Tipped Drill Body Coolant Thru
0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body
-
-
-
YG-1 13.5 mm Dia. 132 Cobalt Hardslick Throw Away Drill Insert
13.50MM PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
YG-1 18.9 mm Dia. 140 Carbide TiAlN 5XD Non-Coolant Thru Drill
18.90MM CARBIDE DREAM DRILL (5XD) – METRIC
-
-
-
YG-1 2.1562 Dia. 132 HSS TiAlN Throw Away Drill Insert
2-5/32 SUPER HSS(T15) SM POINT THROW-AWAY DRILL Insert TIALN COATED
-
-
-
-
HAM 3.65 mm Dia. 137 TA-C Coolant Thru Drill
3.65 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Ingersoll 0.813 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.813 (20.65 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
-
-
-
YG-1 1.8750 Dia. 132 HSS Hardslick Throw Away Drill Insert
1-7/8 HSS(M4) THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
Tungaloy 51 mm Dia. 3XD Indexable Insert Drill
51mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
HAM 5.7 mm Dia. 137 TA-C Coolant Thru Drill
5.70 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
Ingersoll 0.5945 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.5945 (15.10 mm) QwikTwist Tip Carbide
-
-
-
YG-1 1.1250 Dia. 132 HSS Hardslick Throw Away Drill Insert
1-1/8 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
HAM 14 mm Dia. 137 TA-C Coolant Thru Drill
14.00 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 0.6719 Dia. 132 Cobalt TiAlN Throw Away Drill Insert
43/64 PREMIUM COBALT(M48) THROW-AWAY DRILL InsertS TIALN COATED
-
HAM 2.5 mm Dia. 120 TA Non-Coolant Thru Drill
2.50 mm Solid Carbide Twist Drill, 2 Flute, TA Coated, Non-Coolant
-
YG-1 0.7187 Dia. 132 Cobalt Hardslick Throw Away Drill Insert
23/32 PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
Ingersoll 1.7323 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.732 (44.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 6.7717 Dia. Drill Tube System Coolant Thru
6.772 – 7.244″ Drill Tubes – STS System – Inner 4 Start Thread Connection
-
Ingersoll 0.272 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.2716 (6.90 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|
-
YG-1 8.5 mm Dia. 140 Carbide TiAlN+TiN 3XD Coolant Thru Drill
8.50MM CARBIDE DREAM DRILL HIGH FEED 3XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
-
YG-1 0.7031 Dia. Series 1 Taper Shank-Straight Flute Spade Holder
SERIES 1 TAPER SHANK & STRAIGHT FLT SHORT LENGTH SPADE DRILL HOLDER
-
-
-
HAM 2.6 mm Dia. 120 Bright Non-Coolant Thru Drill
2.60 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant