Holemaking
Showing 6551–6600 of 47158 results
-
-
HAM 5.95 mm Dia. 137 TA-C Coolant Thru Drill
15/64″ 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
Link UNIDAPT 7-Piece Holder & Stub Drills – R Style #1 – #7
UNIDAPT HOLDER & STUB DRILLS – R TYPE SET
-
-
-
-
-
-
-
YG-1 2.9375 Dia. 144 Cobalt Hardslick Throw Away Drill Insert
2-15/16 PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
HAM 8 mm Dia. 137 TA-C Coolant Thru Drill
8.00 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Iscar 2.0469 Dia. Tube Counterbore Coolant Thru
2.047″ Deep Single Tube Counterbore Without a Through Hole, Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
STI 19.05 mm Dia. 130 TiAlN Carbide 5-8XD Non-Coolant Thru Drill
19.05 MM DIA 3 FLUTE NON COOLANT TIALN
-
-
-
-
Iscar 1.248 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
1.248″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
-
-
YG-1 0.5625 Dia. 132 Cobalt TiN Throw Away Drill Insert
9/16 PREMIUM COBALT(M48) THROW AWAY DRILL InsertS TIN COATED
-
YG-1 3.9 mm Dia. 118 Carbide DLC 5XD Coolant Thru Drill
3.90MM CARBIDE DREAM DRILL FOR ALUMINUM W/ COOLANT (5XD) – METRIC
-
YG-1 3.2 mm Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
3.20MM CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
HAM 5.56 mm Dia. 140 TA-C Coolant Thru Drill
7/32″ 8XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
HAM 7.8 mm Dia. 120 Bright Non-Coolant Thru Drill
7.80 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
YG-1 2.95 mm Dia. 118 Carbide Bright Jobber Non-Coolant Thru Drill
2.95MM CARBIDE JOBBER LENGTH TWIST DRILL TIALN COATED
-
YG-1 17.5 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
17.50MM CARBIDE (C5) THROW-AWAY DRILL Insert TIALN-COATED
-
-
Ingersoll 0.6692 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.669 (17.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
YG-1 2.5313 Dia. 132 HSS Hardslick Throw Away Drill Insert
2-17/32 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
Iscar 0.9062 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.906″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
YG-1 14 mm Dia. 140 Carbide TiAlN 3XD, 5XD, 7XD Drill Insert Coolant Thru
14.00MM I-DREAMDRILL Insert TIALN-COATED #B
-
Tungaloy 1.3125 Dia. 2XD Indexable Insert Drill
1.312″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
-
Iscar 0.8386 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.839″ Exchangeable 3 Flute Drilling Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
-
-
-
YG-1 1.0937 Dia. 140 Carbide TiCN 3XD, 5XD, 7XD Drill Insert Coolant Thru
1-3/32 I-DREAMDRILL Insert INOX TICN-COATED #H
-
-
YG-1 0.7969 Dia. 132 HSS TiAlN Throw Away Drill Insert
51/64 SUPER HSS(T15) SM POINT THROW-AWAY DRILL Insert TIALN COATED
-
YG-1 0.4844 Dia. 118 Carbide TiAlN Jobber Non-Coolant Thru Drill
31/64 CARBIDE JOBBER LENGTH TWIST DRILL TIALN COATED
-
YG-1 44 mm Dia. 132 HSS TiN Throw Away Drill Insert
44.00MM SUPER HSS(T15) THROW AWAY DRILL Insert TIN-COATED
-
Iscar 0.4724 Dia. Carbide TiAlN+TiN Exchangeable Drill Heads Coolant Thru
.472″ Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)
-
-