Holemaking
Showing 6301–6350 of 47158 results
-
YG-1 5 mm Dia. 140 Carbide TiAlN+TiN 3XD Coolant Thru Drill
5.00MM CARBIDE DREAM DRILL HIGH FEED 3XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
-
-
YG-1 44 mm Dia. 132 HSS Hardslick Throw Away Drill Insert
44.00MM HSS(M4) THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
HAM 2.3 mm Dia. 140 TA-CN Coolant Thru Drill
2.30 mm 8XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-
-
-
-
HAM 6.75 mm Dia. 140 TA-C Coolant Thru Drill
17/64″ 8XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
HAM 12.5 mm Dia. 140 TA-CN Coolant Thru Drill
12.50 mm 8XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
HAM 2.85 mm Dia. 140 TA Non-Coolant Thru Drill
2.85 mm Solid Carbide Twist Drill, 2 Flutes, TA Coated, Non-Coolant
-
-
Iscar 2.9528 Dia. Drill Tube System Coolant Thru
2.953 – 3.189″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
-
-
YG-1 10.3 mm Dia. 140 Carbide TiAlN 15XD Coolant Thru Drill
10.30MM CARBIDE DRILL MQL TYPE W/ COOLANT (15XD)
-
-
-
-
-
YG-1 0.4375 Dia. Series Z Taper Shank-Straight Flute Spade Holder
SERIES Z TAPER SHANK & STRAIGHT FLT SHORT LENGTH SPADE DRILL HOLDER
-
HAM 12.6 mm Dia. 137 TA-C Coolant Thru Drill
12.60 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
YG-1 2.2812 Dia. 132 HSS Hardslick Throw Away Drill Insert
2-9/32 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
YG-1 3.45 mm Dia. 118 Carbide Bright Jobber Non-Coolant Thru Drill
3.45MM CARBIDE JOBBER LENGTH TWIST DRILL TIALN COATED
-
YG-1 0.0787 Dia. 130 TiN Jobber Non-Coolant Thru Drill
2.0MM HSS-EX HPD-SUS TWIST DRILL TiN-COATED (JOBBERS)
-
-
-
-
-
Iscar 1.0866 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
1.086″ Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)
-
-
Tungaloy 13.5 mm Dia. TiAlN 3XD Coolant Thru Drill
13.5 mm GigaJetDrill series with coolant hole, L/D=3, dia=3.0 – 20.0mm
-
-
YG-1 13.6 mm Dia. 140 Carbide TiAlN 3XD Non-Coolant Thru Drill
13.60MM CARBIDE DREAM DRILL W/O COOLANT HOLES (3XD)
-
-
-
-
Ingersoll 1.4567 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.457 (37.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
HAM 13.9 mm Dia. 137 TA-C Coolant Thru Drill
13.90 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 6.7 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
6.70MM CARBIDE DREAM DRILL W/ COOLANT (5XD) – METRIC
-
Iscar 0.4764 Dia. Carbide TiAlN+TiN Exchangeable Drill Heads Coolant Thru
.476″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
-