Holemaking
Showing 5801–5850 of 47158 results
-
-
-
-
-
-
-
YG-1 1.0469 Dia. 132 Carbide Hardslick Throw Away Drill Insert
1-3/64 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
Ingersoll 0.5118 Dia. Bright BTA STS Tubes Coolant Thru
0.512 BTA STS Tubes|Single tube system|.433-2.205″ (11.0-56 mm)|
-
Ingersoll 0.8622 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.8622 (21.90 mm) QwikTwist Tip Carbide
-
HAM 5.5 mm Dia. 140 TA-C Non-Coolant Thru Drill
5.50 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
-
-
-
YG-1 11.2 mm Dia. 140 Carbide TiAlN 15XD Coolant Thru Drill
11.20MM CARBIDE DRILL MQL TYPE W/ COOLANT (15XD)
-
-
-
HAM 13.8 mm Dia. 140 TA-C Coolant Thru Drill
13.80 mm 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 0.3437 Dia. 140 Carbide TiAlN 8XD Coolant Thru Drill
11/32 CARBIDE DREAM DRILL INOX W/ COOLANT (8XD)
-
-
-
YG-1 27 mm Dia. 132 Carbide TiN Throw Away Drill Insert
27.00MM CARBIDE (C3) THROW-AWAY DRILL Insert TIN-COATED
-
-
-
-
Iscar 1.693 Dia. Tube Coolant Thru Drill
1.693″ Deep Single Tube Drills with External 2 and 4 Start Thread and 2 or 3 Brazed Tips (.496-2.559 dia.)
-
YG-1 0.0820 Dia. 135 HSS TiN Straight Shank Jobber Non-Coolant Thru Drill
#45 HSS(M2) JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
Ingersoll 0.8438 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.843 (21.41 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
-
Iscar 1.0984 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
1.098″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
-
Iscar 6.378 Dia. Tube Coolant Thru Drill
6.378″ Deep Single Tube Drills with Internal Single Start Thread and Cartridges (1.142-9.685 dia.)
-
YG-1 5.2 mm Dia. 140 Carbide TiAlN+TiN 5XD Coolant Thru Drill
5.20MM CARBIDE DREAM DRILL HIGH FEED 5XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
-
-
-
-
-
-
YG-1 0.2812 Dia. 140 Carbide TiAlN 3XD Non-Coolant Thru Drill
9/32 CARBIDE DREAM DRILL W/O COOLANT HOLES (3XD)
-
-
-
HAM 8.1 mm Dia. 137 TA-C Coolant Thru Drill
8.10 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Tungaloy 0.3307 Dia. TiAlN DMP Drill Head
0.3307″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
Iscar 0.7874 Dia. Tube Coolant Thru Drill
0.787″ Deep Single Tube Drills with Internal Single Start Thread Carrying Triangular Inserts (.630-1.102 dia.)
-
YG-1 10 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
10.00MM CARBIDE (C3) THROW-AWAY DRILL Insert TIALN-COATED
-
-
-
-
-
