Holemaking
Showing 5451–5500 of 47158 results
-
YG-1 4.2 mm Dia. 140 Carbide TiAlN 20XD Coolant Thru Drill
4.20MM CARBIDE DRILL MQL TYPE W/ COOLANT (20XD)
-
-
YG-1 1.4687 Dia. 132 Carbide TiAlN Throw Away Drill Insert
1-15/32 CARBIDE (C5) SM POINT THROW-AWAY DRILL Insert TIALN-COATED
-
YG-1 16 mm Dia. 132 Carbide TiN Throw Away Drill Insert
16.00MM CARBIDE (C3) THROW-AWAY DRILL Insert TIN-COATED
-
-
Tungaloy 9.1 mm Dia. TiAlN 5XD Coolant Thru Drill
9.1 mm GigaJetDrill series with coolant hole, L/D=5, dia=3.0 – 20.0mm
-
-
HAM 2.55 mm Dia. 140 TA Non-Coolant Thru Drill
2.55 mm Solid Carbide Twist Drill, 2 Flutes, TA Coated, Non-Coolant
-
-
YG-1 1.0937 Dia. 132 HSS Hardslick Throw Away Drill Insert
1-3/32 HSS(M4) THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
-
Tungaloy 0.7913 Dia. TiAlN DMP Drill Head
0.7913″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
-
-
YG-1 1.0625 Dia. 118 HSS Oxide Morse Taper Shank Non-Coolant Thru Drill
1-1/16 HSS(M2) MORSE TAPER SHANK TWIST DRILLS
-
-
-
-
Tungaloy 1.7500 Dia. 4XD Indexable Insert Drill
1-3/4″ TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
-
-
-
-
Ingersoll 0.748 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.748 (19.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
-
Ingersoll 0.5118 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.512 (13.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
YG-1 54.99 mm Dia. 132 HSS Hardslick Throw Away Drill Insert
55.00MM SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
HAM 5.4 mm Dia. 140 TA-C Coolant Thru Drill
5.40 mm 8XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Ingersoll 1.1693 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.1693 (29.70 mm) SpadeTwist Tip
-
-
-
Tungaloy 1.0156 Dia. 3XD Indexable Insert Drill
1.062″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
-
YG-1 0.3594 Dia. 118 Carbide TiAlN Jobber Non-Coolant Thru Drill
23/64 CARBIDE JOBBER LENGTH TWIST DRILL TIALN COATED
-
-
Iscar 0.5669 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.567″ General Use DCM Drill Heads
-
Ingersoll 0.7874 Dia. 140 8XD Replaceable Tipped Drill Body Coolant Thru
0.7874 (20.0 mm)-0.8228 (20.9 mm) SpadeTwist Body
-
-
-
Tungaloy 8.6 mm Dia. TiAlN 3XD Non-Coolant Thru Drill
8.6 mm GigaPowerDrill series without coolant hole, L/D=3, dia=3.0 – 16.0mm
-
HAM 2.78 mm Dia. 140 TA-CN Coolant Thru Drill
7/64″ 5XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-