job shop
Showing 1251–1300 of 43236 results
-
-
-
-
Advent Tool 11.5 Pitch TiN NPT Thread Mill Insert
External Thread, 5? Positive Rake, 1.5″ LOC , 0.375″ Height, 0.13″Thick EDP# 51119, P/N ATM-410A115NPTPC, 11.5-NPT, TiN Coating
-
HAM 8 mm Dia. 140 Bright Coolant Thru Drill
8.00 mm 3XD Solid Carbide Multi Drill, 2 Straight Flutes, Bright, Coolant Thru
-
-
-
-
HAM 12 mm Dia. 90 TA Non-Coolant Thru Drill
12.00 mm Solid Carbide NC Center Drill, 2 Flutes, TA Coated
-
Iscar 0.1180 in or 2.9972 mm Cham Mill Carbide Tialn 4 Flute End Mill
Size: 0.118″ x 0.472″ x 0.307″ x 0.963″
-
-
-
-
-
YG-1 3.7 mm Dia. 140 Carbide TiAlN 3XD Non-Coolant Thru Drill
3.70MM CARBIDE DREAM DRILL W/O COOLANT HOLES (3XD)
-
Tungaloy 5.2 mm Dia. TiAlN 3XD Non-Coolant Thru Drill
5.2 mm GigaPowerDrill series without coolant hole, L/D=3, dia=3.0 – 16.0mm
-
YG-1 6.5 mm Dia. 140 Carbide TiAlN 15XD Coolant Thru Drill
6.50MM CARBIDE DRILL MQL TYPE W/ COOLANT (15XD)
-
YG-1 0.7031 Dia. 135 HSS TiN Straight Shank Jobber Non-Coolant Thru Drill
45/64 HSS(M2) JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS (3PCS)
-
-
YG-1 8.8 mm Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
8.80MM CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
-
-
Iscar 1.3386 Dia. Tube Coolant Thru Drill
1.339″ Deep Single Tube Counterbore Without a Through Hole, Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
-
HAM 8.6 mm Dia. 140 TA-C Coolant Thru Drill
8.70 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 5.3 mm Dia. 140 Carbide TiAlN 5XD Non-Coolant Thru Drill
5.30MM CARBIDE DREAM DRILL (5XD) – METRIC
-
Tungaloy 1.0156 Dia. 3XD Indexable Insert Drill
1.062″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
-
STI 9.09 mm Dia. 130 TiAlN Carbide 5-8XD Non-Coolant Thru Drill
9.09 MM DIA 3 FLUTE NON COOLANT TIALN
-
Advent Tool 14 Pitch Bright UN Thread Mill Insert
External Thread, Neutral Face, 1.5″ LOC , 0.25″ Height, 0.093″Thick EDP# 50219, P/N ATM-38B14, 14-UN, Uncoated
-
Iscar 0.6299 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.630″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
-
Advent Tool 10 Pitch Bright Stub Acme Thread Mill Insert
External Thread, 5? Positive Rake, 1.5″ LOC , 0.31″ Height, 0.13″Thick EDP# 51018, P/N ATM-410A10SAP, 10-Stub Acme, Uncoated
-
-
YG-1 28 mm Dia. 132 Cobalt Hardslick Throw Away Drill Insert
28.00MM PREMIUM COBATL(M48) THROW-AWAY DRILL InsertS HARDSLICK COATED
-
YG-1 0.3770 Dia. 135 HSS TiN Straight Shank Jobber Non-Coolant Thru Drill
V HSS(M2) JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
YG-1 1.51 mm Dia. 118 Carbide Bright Jobber Non-Coolant Thru Drill
1.51MM CARBIDE JOBBER LENGTH TWIST DRILL TIALN COATED
-
HAM 14 mm Dia. 140 TA-C Coolant Thru Drill
14.10 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 29 mm Dia. 132 HSS Hardslick Throw Away Drill Insert
29.00MM SUPER HSS(T15) THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
HAM 12 mm Dia. 140 TA-C Coolant Thru Drill
12.00 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Tungaloy 14.5 mm Dia. 8XD Indexable Drill w/ Flanged Shank
14.5mm DrillMeister Indexable head drill with flanged shank
-
YG-1 0.9688 Dia. 132 Carbide TiN Throw Away Drill Insert
31/32 CARBIDE (C5) THROW-AWAY DRILL Insert TIN-COATED
-
-
-
Advent Tool 12 Pitch TiAlN Full Acme Thread Mill Insert
External Thread, Neutral Face, 1.5″ LOC , 0.31″ Height, 0.13″Thick EDP# 50906, P/N ATM-410A12FAZ, 12-Full Acme, TiAlN Coating
-
Tungaloy 0.5625 Dia. TiAlN DMP Drill Head
0.563″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.