indexable drill
Showing 8151–8200 of 8347 results
-
YG-1 1.1614 – 1.1807 Dia. 3XD Flanged Shank Drill Holder (I-Dream)
1.1614 MIN DIA 1.1807 MAX DIA I-DREAM DRILL HOLDER, FLANGED SHANK (3XD)
-
Ingersoll 0.5512 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.551 (14.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.2992 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.299 (33.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Iscar 0.248 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.248″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
Tungaloy 12 mm Dia. Indexable Drill w/ Cylindrical Shank
12mm DrillMeister Indexable head drill with cylindrical shank
-
Tungaloy 0.3150 Dia. TiAlN DMP Drill Head
0.315″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
Iscar 0.7205 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.720″ Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)
-
Tungaloy 0.9370 Dia. 5XD Indexable Insert Drill
0.937″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
-
Tungaloy 29 mm Dia. 4XD Indexable Insert Drill
29mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Tungaloy 14 mm Dia. Indexable Drill w/ Cylindrical Shank
14mm DrillMeister Indexable head drill with cylindrical shank
-
Iscar 0.9449 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.945″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
Tungaloy 53 mm Dia. 5XD Indexable Insert Drill
53mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Ingersoll 0.5315 Dia. 140 5XD Replaceable Tipped Drill Body Coolant Thru
0.5315 (13.5 mm) QwikTwist Body
-
-
Iscar 0.8661 Dia. Carbide TiAlN Exchangeable Self-Centering Drill Head Coolant Thru
.866″ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
-
Tungaloy 19 mm Dia. Indexable Drill w/ Cylindrical Shank
19mm DrillMeister Indexable head drill with flanged shank
-
YG-1 30 mm Dia. 140 Carbide TiAlN 3XD, 5XD, 7XD Drill Insert Coolant Thru
30.00MM I-DREAMDRILL Insert TIALN-COATED #J
-
-
Tungaloy 1.8750 Dia. 5XD Indexable Insert Drill
1-7/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
Ingersoll 1.2913 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.2913 (32.80 mm) SpadeTwist Tip
-
Ingersoll 1.0313 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.031 (26.19 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Iscar 0.3543 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.354″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
Tungaloy 1.7500 Dia. 5XD Indexable Insert Drill
1-3/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
Iscar 0.9094 Dia. Carbide TiAlN+TiN Exchangeable Drill Heads Coolant Thru
.909″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
Iscar 1 Dia. Carbide TiAlN Exchangeable DFN Drill Head Coolant Thru
1.” Exchangeable DFN Drill Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
-
Ingersoll 0.75 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.750 (19.05 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.7205 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.720″ DCM Drill Heads for Cast Iron
-
Ingersoll 1.2047 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.2047 (30.60 mm) SpadeTwist Tip
-
Ingersoll 0.5709 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.571 (14.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.6181 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.618″ Exchangeable Drilling Heads for Cast Iron
-
Iscar 1.1181 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
1.118″ Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)
-
Ingersoll 1.3125 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.312 (33.32 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.7874 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.787″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
Ingersoll 0.5984 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.5984 (15.20 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|
-
Ingersoll 1.1417 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.142 (29.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
YG-1 23.7 mm Dia. 140 Carbide TiCN 3XD, 5XD, 7XD Drill Insert Coolant Thru
23.70MM I-DREAMDRILL Insert INOX TICN-COATED #F
-
Iscar 0.5827 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.583″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
Ingersoll 0.622 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.6220 (15.80 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|
-
-
Ingersoll 1.75 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.750 (44.45 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 1.1456 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
1.145″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
Iscar 0.5469 Dia. Carbide TiAlN Exchangeable Self-Centering Drill Head Coolant Thru
.547″ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
-
Ingersoll 1.4375 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.437 (36.50 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.4844 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.484″ Exchangeable Drilling Heads for Cast Iron
-
Iscar 0.744 Dia. Carbide TiAlN Exchangeable Self-Centering Drill Head Coolant Thru
.744″ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
-
-
Tungaloy 9 mm Dia. 8XD Indexable Drill w/ Flanged Shank
9mm DrillMeister Indexable head drill with flanged shank
-
Tungaloy 51 mm Dia. 3XD Indexable Insert Drill
51mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter