holemaking
Showing 39051–39100 of 46144 results
-
Iscar 0.374 Dia. 8XD Indexable Drill Head Coolant Thru
0.374″ Indexable Head Drills with Coolant Holes and a Cylindrical Shank, Drilling Depth 8xD
-
YG-1 17.9 mm Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
17.90MM CARBIDE DREAM DRILL W/ COOLANT (3XD) – METRIC
-
YG-1 0.5625 Dia. 132 HSS Hardslick Throw Away Drill Insert
9/16 SUPER HSS(T15) THROW AWAY DRILL Insert HARDSLICK COATED
-
Ingersoll 1.4961 Dia. 140 3XD Replaceable Tipped Drill Body Coolant Thru
1.4961 (38.0 mm)-1.5315 (38.9 mm) SpadeTwist Body
-
-
HAM 1.2 mm Dia. 130 Bright Non-Coolant Thru Drill
1.20 mm Solid Carbide Twist Drill, 2 Flutes, AMS Geometry, Bright, Non-Coolant
-
-
-
-
Ingersoll 1.5312 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.5315 (38.90 mm) SpadeTwist Tip
-
-
YG-1 1.0313 Dia. 132 HSS TiAlN Throw Away Drill Insert
1-1/32 SUPER HSS(T15) THROW-AWAY DRILL Insert TIALN COATED
-
-
HAM 10.1 mm Dia. 137 TA-C Coolant Thru Drill
10.10 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
Iscar 0.8071 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.807″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
-
YG-1 0.2055 Dia. 118 Carbide Bright Jobber Twist Non-Coolant Thru Drill
#5 CARBIDE JOBBER LENGTH TWIST DRILL
-
-
-
Iscar 0.7284 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.728″ DCM Drill Heads for Cast Iron
-
-
-
Iscar 0.874 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.874″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
ZCC 1534SU03-1200 KDG303 0.4724 Dia. 140 TIALN 3XD Coolant Thru Drill
0.4724 DIA CARBIDE COOLANT DRILL
-
YG-1 0.7500 Dia. 118 Carbide DLC 5XD Coolant Thru Drill
3/4 CARBIDE DREAM DRILL FOR ALUMINUM W/ COOLANT (5XD)
-
Ingersoll 1.4375 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.437 (36.50 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
YG-1 1.0469 Dia. 132 Carbide Hardslick Throw Away Drill Insert
1-3/64 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
Tungaloy 16.5 mm Dia. TiAlN 3XD Coolant Thru Drill
16.5 mm GigaJetDrill series with coolant hole, L/D=3, dia=3.0 – 20.0mm
-
-
-
YG-1 9.7 mm Dia. 140 Carbide TiAlN 15XD Coolant Thru Drill
9.70MM CARBIDE DRILL MQL TYPE W/ COOLANT (15XD)
-
YG-1 2.0625 Dia. 132 HSS Hardslick Throw Away Drill Insert
2-1/16 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
Iscar 0.4724 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.472″ Exchangeable Drilling Heads for Cast Iron
-
-
-
-
-
HAM 4.76 mm Dia. 140 TA-C Non-Coolant Thru Drill
3/16″ 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
YG-1 0.2211 Dia. 135 HSS Split Point Aircraft Non-Coolant Thru Drill
#2 HSS 6″ AIRCRAFT EXTENSION DRILL 135 DEGREE SPLIT POINT STEAM HOMO
-
-
-
Tungaloy 1.1875 Dia. 3XD Indexable Insert Drill
1.187″ TungSix-Drill Indexable insert drills, L/D=3, Whistle notch
-
Ingersoll 1.4173 Dia. 140 5XD Replaceable Tipped Drill Body Coolant Thru
1.4173 (36.0 mm)-1.4528 (36.9 mm) SpadeTwist Body
-
Iscar 0.386 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.386″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)