holemaking
Showing 38651–38700 of 46144 results
-
-
YG-1 37 mm Dia. 132 HSS TiAlN Throw Away Drill Insert
37.00MM SUPER HSS(T15) SM POINT THROW-AWAY DRILL Insert TIALN COATED
-
HAM 15.08 mm Dia. 140 TA-CN Coolant Thru Drill
19/32″ 5XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
HAM 3.7 mm Dia. 137 TA-C Coolant Thru Drill
3.70 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 3.2500 Dia. 144 HSS Hardslick Throw Away Drill Insert
3-1/4 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
YG-1 14 mm Dia. 132 HSS Hardslick Throw Away Drill Insert
14.00MM SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
HAM 0.9 mm Dia. 135 TA Coolant Thru Drill
0.90 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
YG-1 1.0156 Dia. 132 Cobalt TiN Throw Away Drill Insert
1-1/64 PREMIUM COBALT(M48) THROW AWAY DRILL InsertS TIN COATED
-
-
-
-
-
-
HAM 11.9 mm Dia. 137 TA-C Coolant Thru Drill
11.90 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
HAM 6.7 mm Dia. 137 TA-C Coolant Thru Drill
6.70 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
HAM 10.32 mm Dia. 137 TA-C Coolant Thru Drill
13/32″ 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
YG-1 0.9375 Dia. 132 HSS Hardslick Throw Away Drill Insert
15/16 HSS(M4) THROW-AWAY DRILL Insert HARDSLICK COATED
-
YG-1 1.3750 Dia. 132 Carbide Hardslick Throw Away Drill Insert
1-3/8 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
Ingersoll 1.5748 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.575 (40.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
-
-
YG-1 0.4219 Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
27/64 CARBIDE DREAM DRILL INOX W/ COOLANT (5XD)
-
-
-
HAM 18.26 mm Dia. 140 TA-C Coolant Thru Drill
23/32″ 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 0.3386 Dia. 130 TiN Stub Non-Coolant Thru Drill
8.6MM HSS-EX HPD-SUS TWIST DRILL TiN-COATED (STUB)
-
-
-
-
-
-
Iscar 0.6875 Dia. Gundrill Coolant Thru
0.687″ Gundrills Carrying Triangular Inserts Featuring 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
-
-
Iscar 8.749 Dia. Drill Tube System Coolant Thru
8.749 – 9.212″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
Ingersoll 0.6063 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.6063 (15.40 mm) QwikTwist Tip Carbide
-
-
-
Iscar 0.6299 Dia. Drill Tube System Coolant Thru
.630 – .650″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
-
-
Tungaloy 3.3 mm Dia. TiAlN 3XD Coolant Thru Drill
3.3 mm GigaJetDrill series with coolant hole, L/D=3, dia=3.0 – 20.0mm