holemaking
Showing 38251–38300 of 46144 results
-
HAM 6.7 mm Dia. 137 TA-C Coolant Thru Drill
6.70 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
HAM 9.13 mm Dia. 140 TA-CN Non-Coolant Thru Drill
9.20 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
-
-
-
YG-1 1.0313 Dia. 132 HSS Hardslick Throw Away Drill Insert
1-1/32 SUPER HSS(T15) THROW-AWAY DRILL Insert HARDSLICK COATED
-
Iscar 0.3504 Dia. Carbide TiAlN Exchangeable Self-Centering Drill Head Coolant Thru
.350″ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
-
Iscar 0.6562 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.657″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
-
Iscar 0.504 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.504″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
HAM 2.95 mm Dia. 135 TA Coolant Thru Drill
2.95 mm 12XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
Iscar 0.9331 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.933″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
-
Tungaloy 0.2559 Dia. TiAlN DMP Drill Head
0.2559″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
YG-1 0.257 Dia. 118 Carbide DLC 5XD Coolant Thru Drill
.2570 CARBIDE DREAM DRILL FOR ALUMINUM W/ COOLANT HOLES (5XD)
-
-
-
Ingersoll 0.7992 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.7992 (20.30 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera
-
Iscar 3.1496 Dia. Tube Coolant Thru Drill
3.15″ Deep Single Tube Drills with External 4 Start Thread and Cartridges (1.142-9.173 dia.)
-
Tungaloy 0.8189 Dia. TiAlN DMP Drill Head
0.8189″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
Ingersoll 0.6692 Dia. 140 8XD Replaceable Tipped Drill Body Coolant Thru
0.6693 (17.000 mm)-0.7047 (17.900 mm) GoldTwist Body
-
-
HAM 8.8 mm Dia. 140 TA-C Non-Coolant Thru Drill
8.80 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
-
YG-1 17 mm Dia. 140 Carbide TiAlN 3XD Non-Coolant Thru Drill
17.00MM CARBIDE DREAM DRILL (3XD) – METRIC
-
Iscar 0.937 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.937″ General Use DCM Drill Heads
-
-
Ingersoll 0.6574 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.657 (16.69 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
-
Ingersoll 1.0591 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.0591 (26.90 mm) SpadeTwist Tip
-
YG-1 3.3 mm Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
3.30MM CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
YG-1 5.8 mm Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
5.80MM CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
HAM 4.8 mm Dia. 137 TA-C Coolant Thru Drill
4.80 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Iscar 0.685 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.685″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
YG-1 16.5 mm Dia. 132 Cobalt Hardslick Throw Away Drill Insert
16.50MM PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
Ingersoll 0.937 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.937 (23.80 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
HAM 10 mm Dia. 140 TA-C Coolant Thru Drill
10.00 mm 8XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
HAM 10.4 mm Dia. 90 TA Non-Coolant Thru Drill
10.40 mm Solid Carbide Countersinker, 3 Flutes, TA Coated
-
