holemaking
Showing 451–500 of 46144 results
-
Iscar 0.5551 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.555″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
Iscar 0.8976 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.898″ Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)
-
HAM 8.9 mm Dia. 140 TA-C Coolant Thru Drill
8.90 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
-
-
HAM 3.6 mm Dia. 137 TA-C Coolant Thru Drill
3.60 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Tungaloy 0.2795 Dia. TiAlN DMP Drill Head
0.2795″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
-
-
-
HAM 6.1 mm Dia. 137 TA-C Coolant Thru Drill
6.10 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
YG-1 0.0937 Dia. 135 Cobalt TiN Straight Shank Jobber Non-Coolant Thru Drill
3/32 HSS(M42) JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
-
YG-1 0.2610 Dia. 118 Carbide Bright Jobber Twist Non-Coolant Thru Drill
G CARBIDE JOBBER LENGTH TWIST DRILL
-
-
-
-
-
YG-1 2.8437 Dia. 144 Cobalt Hardslick Throw Away Drill Insert
2-27/32 PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
-
Ingersoll 0.748 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.748 (19.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Iscar 0.504 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.504″ General Use DCM Drill Heads
-
Iscar 0.4803 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.480″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
HAM 4.8 mm Dia. 137 TA-C Coolant Thru Drill
4.80 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 0.374 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.374″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
YG-1 0.2211 Dia. 130 Cobalt TiN Jobber Non-Coolant Thru Drill
#2 HSS(M35) JOBBER, WORM PATTERN TYPE SS GOLD-P DRILL FOR DEEP HOLES
-
HAM 16 mm Dia. 135 TA Coolant Thru Drill
16.00 mm 12XD Solid Carbide Multi Drill, 2 Straight Flutes, TA Coated, Coolant Thru
-
Ingersoll 1.25 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.2500 (31.75 mm) SpadeTwist Tip
-
-
-
-
-
YG-1 1.1875 Dia. 132 HSS TiN Throw Away Drill Insert
1-3/16 SUPER HSS(T15) THROW AWAY DRILL Insert TIN-COATED
-
YG-1 0.9375 Dia. 132 Carbide Hardslick Throw Away Drill Insert
15/16 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
-
YG-1 3.0937 Dia. 144 HSS Hardslick Throw Away Drill Insert
3-3/32 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
