coolant
Showing 3701–3750 of 31046 results
-
-
Iscar 0.6811 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.681″ General Use DCM Drill Heads
-
Ingersoll 1.875 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.875 (47.63 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
YG-1 4.1 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
4.10MM CARBIDE DREAM DRILL W/ COOLANT (5XD) – METRIC
-
-
-
-
HAM 5 mm Dia. 137 TA-C Coolant Thru Drill
5.00 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Iscar 1.2401 Dia. Carbide TiAlN Exchangeable Self-Centering Drill Head Coolant Thru
1.240″ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
-
-
Iscar 1.2205 Dia. Tube Coolant Thru Drill
1.221″ Deep Single Tube Counterbore with Through Hole, External 4 Start Thread and a Brazed Tip (.744-2.559 dia.)
-
YG-1 11 mm Dia. 132 Carbide Hardslick Throw Away Drill Insert
11.00MM CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
Iscar 0.9062 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.906″ General Use DCM Drill Heads
-
-
Iscar 0.9134 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.913″ Exchangeable 3 Flute Drilling Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
-
-
Ingersoll 0.9449 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
0.9449 (24.00 mm) SpadeTwist Tip
-
-
-
HAM 11.5 mm Dia. 137 TA-C Coolant Thru Drill
11.50 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 15.2 mm Dia. 140 Carbide TiAlN+TiN 3XD Coolant Thru Drill
15.20MM CARBIDE DREAM DRILL HIGH FEED 3XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
Ingersoll 0.7795 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.780 (19.81 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 3.5 mm Dia. TiAlN 5XD Coolant Thru Drill
3.5 mm GigaJetDrill series with coolant hole, L/D=5, dia=3.0 – 20.0mm
-
-
-
-
-
YG-1 3.7 mm Dia. 140 Carbide TiAlN 15XD Coolant Thru Drill
3.70MM CARBIDE DRILL MQL TYPE W/ COOLANT (15XD)
-
-
-
YG-1 0.3750 Dia. 140 Carbide TiAlN 10XD Coolant Thru Drill
3/8 CARBIDE DRILL MQL TYPE W/ COOLANT (10XD)
-
-
-
Ingersoll 2 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
2.000 (50.80 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
-
-
-
-
-
HAM 1.6 mm Dia. 135 TA Coolant Thru Drill
1.60 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
Ingersoll 0.7676 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.768 (19.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
YG-1 24 mm Dia. 140 Carbide TiAlN 3XD, 5XD, 7XD Drill Insert Coolant Thru
24.00MM I-DREAMDRILL Insert TIALN-COATED #G
-
ZCC 1536SU05-0830 KDG303 0.3268 Dia. 140 TIALN 5XD Coolant Thru Drill
0.3268 DIA CARBIDE COOLANT DRILL
-
-
-
YG-1 16 mm Dia. 132 Carbide Hardslick Throw Away Drill Insert
16.00MM CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-