coolant
Showing 1101–1150 of 31046 results
-
YG-1 1.0000 Dia. 132 Carbide TiN Throw Away Drill Insert
1.000 CARBIDE (C5) THROW-AWAY DRILL Insert TIN-COATED
-
Iscar 0.6142 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.614″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
-
YG-1 0.4844 Dia. 118 Carbide DLC 5XD Coolant Thru Drill
31/64 CARBIDE DREAM DRILL FOR ALUMINUM W/ COOLANT (5XD)
-
YG-1 0.7031 Dia. Series 1 Taper Shank-Straight Flute Spade Holder
SERIES 1 TAPER SHANK & STRAIGHT FLT SHORT LENGTH SPADE DRILL HOLDER
-
-
HAM 13.9 mm Dia. 137 TA-C Coolant Thru Drill
13.90 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 0.7187 Dia. 132 Carbide Hardslick Throw Away Drill Insert
23/32 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
Ingersoll 1.4567 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.457 (37.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Iscar 0.2913 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.291″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
-
-
-
YG-1 61 mm Dia. 132 HSS TiAlN Throw Away Drill Insert
61.00MM SUPER HSS(T15) SM POINT THROW-AWAY DRILL Insert TIALN COATED
-
Tungaloy 0.4331 Dia. TiAlN DMC Drill Head
0.4331″ DrillMeister DMC Drill heads for indexable head drills for high accuracy drilling
-
Ingersoll 1.378 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.3780 (35.00 mm) SpadeTwist Tip
-
YG-1 0.1875 Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
3/16 CARBIDE DREAM DRILL W/ COOLANT HOLES(3XD)
-
-
YG-1 9.5 mm Dia. 132 HSS TiAlN Throw Away Drill Insert
9.50MM SUPER HSS(T15) SM POINT THROW-AWAY DRILL Insert TIALN COATED
-
-
-
-
-
Tungaloy 21.5 mm Dia. 4XD Indexable Insert Drill
21.5mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Iscar 0.7874 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.787″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
YG-1 0.3750 Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
3/8 CARBIDE DREAM DRILL INOX W/ COOLANT (5XD)
-
-
YG-1 2.4375 Dia. 132 HSS Hardslick Throw Away Drill Insert
2-7/16 HSS(M4) THROW-AWAY DRILL Insert HARDSLICK COATED
-
HAM 5.95 mm Dia. 140 TA-CN Coolant Thru Drill
15/64″ 8XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
HAM 6.75 mm Dia. 140 TA-C Coolant Thru Drill
17/64″ 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Ingersoll 0.937 Dia. Bright BTA Brazed STS Coolant Thru
0.937 BTA Brazed|Single tube system – crosshole|External 4-start thread|.496-2.559″ (12.6-65.0 mm)|
-
-
HAM 4.5 mm Dia. 137 TA-C Coolant Thru Drill
4.50 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Ingersoll 0.5906 Dia. 140 8XD Replaceable Tipped Drill Body Coolant Thru
0.5906 (15.0 mm)-0.6260 (15.9 mm) GoldTwist Body
-
-
-
HAM 4.4 mm Dia. 137 TA-C Coolant Thru Drill
4.40 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 0.815 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.815″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
YG-1 5.7 mm Dia. 140 Carbide TiAlN+TiN 3XD Coolant Thru Drill
5.70MM CARBIDE DREAM DRILL HIGH FEED 3XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
-
Iscar 1.2205 Dia. Tube Coolant Thru Drill
1.221″ Deep Double Tube Counterbore without a Through Hole, External 4 Start Thread and a Brazed Tip (.725-2.559 dia.)
-
-
-
-
Ingersoll 0.8425 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.843 (21.41 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.5709 Dia. 140 3XD Replaceable Tipped Drill Body Coolant Thru
0.5709 (14.5 mm)-0.5866 (14.9 mm) GoldTwist Body
-
HAM 11 mm Dia. 135 TA Coolant Thru Drill
11.00 mm 7XD Solid Carbide Multi Drill, 2 Straight Flutes, TA Coated, Coolant Thru