Holemaking
Showing 43751–43800 of 47158 results
-
Ingersoll 1.2992 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.299 (33.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
YG-1 0.3906 Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
25/64 CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
-
HAM 8.4 mm Dia. 137 TA-C Coolant Thru Drill
8.40 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
YG-1 1.5312 Dia. 132 HSS Hardslick Throw Away Drill Insert
1-17/32 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
HAM 8.8 mm Dia. 140 TA-C Non-Coolant Thru Drill
8.80 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
YG-1 0.7187 Dia. 132 Cobalt Hardslick Throw Away Drill Insert
23/32 PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
-
-
YG-1 17.5 mm Dia. 140 Carbide TiAlN 8XD Coolant Thru Drill
17.50MM CARBIDE DREAM DRILL INOX W/ COOLANT (8XD)
-
Ingersoll 0.563 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
0.563 (14.30 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
YG-1 0.2344 Dia. 135 HSS Bright Screw Machine Non-Coolant Thru Drill
15/64 HSS(M2) SCREW MACHINE DRILL
-
Link 0.3125 Dia. 90 Carbide Bright Performance Chamfer
5/16 X 2-1/2 CARBIDE 4FL 90? PERFORMANCE CHAMFER
-
YG-1 0.1875 Dia. 135 HSS TiN Straight Shank Jobber Non-Coolant Thru Drill
3/16 HSS(M2) JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
-
HAM 1.05 mm Dia. 130 Bright Non-Coolant Thru Drill
1.05 mm Solid Carbide Twist Drill, 2 Flutes, AMS Geometry, Bright, Non-Coolant
-
-
YG-1 12 mm Dia. 132 Carbide TiN Throw Away Drill Insert
12.00MM CARBIDE (C3) THROW-AWAY DRILL Insert TIN-COATED
-
YG-1 12 mm Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
12.00MM CARBIDE DREAM DRILL INOX W/ COOLANT (3XD)
-
Ingersoll 0.7087 Dia. Bright BTA STS Tubes Coolant Thru
0.709 BTA STS Tubes|Single tube system|.433-2.205″ (11.0-56 mm)|
-
-
-
YG-1 10 mm Dia. 132 HSS TiAlN Throw Away Drill Insert
10.00MM SUPER HSS(T15) THROW-AWAY DRILL Insert TIALN COATED
-
YG-1 2.44 mm Dia. 118 Carbide Bright Jobber Non-Coolant Thru Drill
2.44MM CARBIDE JOBBER LENGTH TWIST DRILL TIALN COATED
-
-
-
-
-
Iscar 0.5 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.500″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
-
HAM 1.45 mm Dia. 135 TA Coolant Thru Drill
1.45 mm 5XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
-
YG-1 0.7031 Dia. Series 1 Taper Shank-Straight Flute Spade Holder
SERIES 1 TAPER SHANK & STRAIGHT FLT SHORT LENGTH SPADE DRILL HOLDER
-
-
-
-
HAM 13.7 mm Dia. 140 TA-C Coolant Thru Drill
13.70 mm 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 0.7559 Dia. Indexable Chamfering Drill Head Coolant Thru
0.756″ Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
-
HAM 15.88 mm Dia. 135 Bright Coolant Thru Drill
5/8″ 5XD Solid Carbide Multi Drill, 2 Straight Flutes, Bright, Coolant Thru
-
Iscar 1.0118 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
1.012″ General Use DCM Drill Heads
-
Iscar 1.0197 Dia. Carbide TiAlN Exchangeable Chip Splitting Drill Head Coolant Thru
1.020″ Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel
-
YG-1 2.3125 Dia. 132 HSS Hardslick Throw Away Drill Insert
2-5/16 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
Iscar 0.815 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.815″ General Use DCM Drill Heads
-
-
Ingersoll 0.9449 Dia. 140 5XD Replaceable Tipped Drill Body Coolant Thru
0.9449 (24.0 mm)-0.9803 (24.9 mm) GoldTwist Body
-