Holemaking
Showing 8001–8050 of 47158 results
-
Iscar 1.0079 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
1.008″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
-
-
HAM 5.2 mm Dia. 137 TA-C Coolant Thru Drill
5.20 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 17 mm Dia. 132 HSS TiAlN Throw Away Drill Insert
17.00MM SUPER HSS(T15) THROW-AWAY DRILL Insert TIALN COATED
-
-
-
-
Iscar 1.0118 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
1.012″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
Iscar 0.5937 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.594″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
-
Ingersoll 1 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.000 (25.40 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
-
Iscar 0.4449 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.445″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
-
-
-
Tungaloy 50 mm Dia. 2XD Indexable Insert Drill
50mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
-
-
-
-
-
YG-1 3.4375 Dia. 144 HSS Hardslick Throw Away Drill Insert
3-7/16 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
HAM 5.3 mm Dia. 140 TA-CN Coolant Thru Drill
5.30 mm 8XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-
-
-
Ingersoll 1.0157 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
1.0157 (25.80 mm) QwikTwist Tip Carbide
-
Ingersoll 0.4921 Dia. 140 8XD Replaceable Tipped Drill Body Coolant Thru
0.4921 (12.500 mm)-0.5079 (12.900 mm) GoldTwist Body
-
-
HAM 1.25 mm Dia. 135 TA Coolant Thru Drill
1.25 mm 5XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
-
-
YG-1 0.5000 Dia. Flat HSS TiN Throw Away Drill Insert
1/2 SUPER HSS (T15) FLAT BOTTOM DRILL Insert TIN COATED
-
-
-
YG-1 0.2992 Dia. 130 Cobalt TiN Jobber Non-Coolant Thru Drill
7.6 HSS(M35) JOBBER, WORM PATTERN TYPE STRAIGHT SHANK GOLD-P DRILL FOR DEEP HOLES
-
Iscar 0.4016 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.402″ General Use DCM Drill Heads
-
-
HAM 17.5 mm Dia. 140 TA-C Coolant Thru Drill
17.50 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 15.6 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
15.60MM CARBIDE DREAM DRILL W/ COOLANT (5XD) – METRIC
-
-
HAM 5.1 mm Dia. 140 TA-CN Non-Coolant Thru Drill
5.10 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
HAM 5.9 mm Dia. 140 TA-CN Non-Coolant Thru Drill
5.90 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
