Multi Insert
Showing 2451–2500 of 2555 results
-
-
Tungaloy TDS Metric Cartridge Set
TungDrillBig series, TDS cartridge set, L/D=2.5, dia=55 – 80mm, diameter adjustable with setting plate
-
-
Tungaloy 23 mm Dia. 3XD Indexable Insert Drill
23mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
Tungaloy 16.5 mm Dia. 4XD Indexable Insert Drill
16.5mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 1.7717 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.772 (45.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.8465 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.847 (21.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.6535 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.654 (42.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 42 mm Dia. 3XD Indexable Insert Drill
42mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.281 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.281 (32.54 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
-
-
Tungaloy 1.6250 Dia. 4XD Indexable Insert Drill
1-5/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
Ingersoll 2.625 Dia. Bright 2XD Large Diameter Indexable Coolant Thru Drill
2.625 (66.68 mm) Large Diameter Indexable Drills|L:D Ratio – 2:1|
-
Tungaloy 1.6250 Dia. 5XD Indexable Insert Drill
1-5/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
-
Ingersoll 1.2188 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
1.219 (30.96 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Tungaloy 26 mm Dia. 4XD Indexable Insert Drill
26mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Iscar 1.8125 Dia. 2XD Indexable Square Insert Coolant Thru Drill
1.812″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Ingersoll 1.024 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.024 (26.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 1.7500 Dia. 4XD Indexable Insert Drill
1-3/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
-
Iscar 0.6693 Dia. Indexable Chamfering Drill Head Coolant Thru
0.669 Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
-
Ingersoll 0.781 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
0.781 (19.84 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
-
Tungaloy 1.3125 Dia. 3XD Indexable Insert Drill
1.312″ TungSix-Drill Indexable insert drills, L/D=3, Whistle notch
-
Tungaloy 1.3125 Dia. 4XD Indexable Insert Drill
1.312″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
-
-
Tungaloy 45 mm Dia. 3XD Indexable Insert Drill
45mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.4062 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
1.406 (35.71 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
Tungaloy 46 mm Dia. 4XD Indexable Insert Drill
46mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
-
Ingersoll 0.591 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.591 (15.01 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 0.8125 Dia. 3XD Indexable Insert Drill
0.812″ TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
Ingersoll 0.6574 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.658 (16.71 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.6875 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.687 (42.85 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
-
Ingersoll 0.4921 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.492 (12.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Tungaloy 43 mm Dia. 3XD Indexable Insert Drill
43mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.5625 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.562 (39.67 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.811 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.811 (46.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.4961 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.496 (38.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Tungaloy 19.5 mm Dia. 3XD Indexable Insert Drill
19.5mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
-
