Multi Insert
Showing 2201–2250 of 2555 results
-
Tungaloy 1.1250 Dia. 2XD Indexable Insert Drill
1-1/8″ TungSix-Drill Indexable insert drills, L/D=2, Whistle notch
-
Tungaloy 37 mm Dia. 2XD Indexable Insert Drill
37mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
-
Tungaloy 1.3750 Dia. 2XD Indexable Insert Drill
1-3/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
Tungaloy 27.5 mm Dia. 3XD Indexable Insert Drill
27.5mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
-
-
Ingersoll 0.9449 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.945 (24.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
-
Ingersoll 1.693 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.693 (43.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 0.781 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
0.781 (19.84 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
-
Ingersoll 1.9688 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.969 (50.01 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Ingersoll 0.9062 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.906 (23.01 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.9844 Dia. 4XD Indexable Square Insert Coolant Thru Drill
0.984″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Ingersoll 0.9688 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
0.969 (24.61 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Tungaloy 40 mm Dia. 3XD Indexable Insert Drill
40mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
-
Tungaloy 22 mm Dia. 2XD Indexable Insert Drill
22mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
-
-
Tungaloy 1.1250 Dia. 3XD Indexable Insert Drill
1-1/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
-
Tungaloy 22 mm Dia. 3XD Indexable Insert Drill
22mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
-
Tungaloy 20.5 mm Dia. 2XD Indexable Insert Drill
20.5mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Ingersoll 0.9252 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.925 (23.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.748 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.748 (19.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.5312 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
0.531 (13.49 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
Ingersoll 1.4062 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
1.406 (35.71 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
Tungaloy 23 mm Dia. 3XD Indexable Insert Drill
23mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 0.8438 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
0.843 (21.41 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
Tungaloy 0.7500 Dia. 4XD Indexable Insert Drill
3/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
Ingersoll 1.4375 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.437 (36.50 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Iscar 0.7031 Dia. 2XD Indexable Square Insert Coolant Thru Drill
0.703″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Ingersoll 0.781 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
0.781 (19.84 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
-
Ingersoll 1.9291 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.929 (49.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 1.7188 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.719 (43.66 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 2.125 Dia. 2XD Indexable Square Insert Coolant Thru Drill
2-1/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Iscar 0.75 Dia. 3XD Indexable Square Insert Coolant Thru Drill
3/4″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Ingersoll 1.719 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.719 (43.66 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|