Multi Insert
Showing 2051–2100 of 2555 results
-
Tungaloy 0.8750 Dia. 3XD Indexable Insert Drill
7/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
Iscar 2.125 Dia. 4XD Indexable Square Insert Coolant Thru Drill
2-1/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
-
Ingersoll 1.2598 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.260 (32.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Tungaloy 1.6250 Dia. 2XD Indexable Insert Drill
1-5/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
Tungaloy 1.2500 Dia. 5XD Indexable Insert Drill
1-1/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
Ingersoll 1.375 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.375 (34.93 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Tungaloy 0.5000 Dia. 4XD Indexable Insert Drill
1/2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
Tungaloy 46 mm Dia. 4XD Indexable Insert Drill
46mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
-
Iscar 0.7812 Dia. 2XD Indexable Square Insert Coolant Thru Drill
0.781″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
-
Tungaloy 46 mm Dia. 5XD Indexable Insert Drill
46mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
-
-
-
-
Ingersoll 2 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
2.000 (50.80 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.0313 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
1.031 (26.19 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
-
-
-
Tungaloy 27.5 mm Dia. 3XD Indexable Insert Drill
27.5mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
Ingersoll 0.7874 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.787 (20.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 1.6250 Dia. 5XD Indexable Insert Drill
1-5/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
-
Iscar 0.689 Dia. 4XD Indexable Square Insert Coolant Thru Drill
0.688″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
-
-
-
Ingersoll 1.063 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.063 (27.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 21.5 mm Dia. 3XD Indexable Insert Drill
21.5mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
-
-
Tungaloy 44 mm Dia. 2XD Indexable Insert Drill
44mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 52 mm Dia. 4XD Indexable Insert Drill
52mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 1.4173 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.417 (36.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 1.3125 Dia. 4XD Indexable Insert Drill
1.312″ TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 0.9252 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.925 (23.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Tungaloy 54 mm Dia. 2XD Indexable Insert Drill
54mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Ingersoll 1.687 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.687 (42.85 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
Ingersoll 0.7188 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
0.719 (18.26 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
-
-