Multi Insert
Showing 1951–2000 of 2555 results
-
Ingersoll 0.813 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
0.813 (20.65 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Tungaloy 15 mm Dia. 4XD Indexable Insert Drill
15mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
-
-
Tungaloy 0.6250 Dia. 4XD Indexable Insert Drill
5/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
Ingersoll 0.8661 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.866 (22.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Iscar 0.8125 Dia. 2XD Indexable Square Insert Coolant Thru Drill
0.812″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
-
Tungaloy TDS Cartridge Set
TungDrillBig series, TDS cartridge set, L/D=2.5, dia=2.250 – 3.157inch, diameter adjustable with setting plate
-
Tungaloy 30 mm Dia. 3XD Indexable Insert Drill
30mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Iscar 0.6299 Dia. Indexable Chamfering Drill Head Coolant Thru
0.630 Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
-
-
-
Tungaloy 49 mm Dia. 3XD Indexable Insert Drill
49mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.7323 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.732 (44.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.984 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.984 (24.99 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 13 mm Dia. 5XD Indexable Insert Drill
13mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Tungaloy 54 mm Dia. 5XD Indexable Insert Drill
54mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Iscar 0.7344 Dia. 3XD Indexable Square Insert Coolant Thru Drill
0.734″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
-
Ingersoll 1.375 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.375 (34.93 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 1.5000 Dia. 4XD Indexable Insert Drill
1-1/2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
-
Ingersoll 0.5 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
0.500 (12.70 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
-
Nine N9MT11T3CT NC60 Cermet Indexable Insert, 0.276 in DC, 0.031 in CR
INDEXABLE MILLING / INDEXABLE DRILLING
-
Iscar 0.875 Dia. 2XD Indexable Square Insert Coolant Thru Drill
7/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Ingersoll 1.811 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.811 (46.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 1.5000 Dia. 3XD Indexable Insert Drill
1-1/2″ TungSix-Drill Indexable insert drills, L/D=3, Whistle notch
-
-
Tungaloy 50 mm Dia. 4XD Indexable Insert Drill
50mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
-
Ingersoll 1.969 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.969 (50.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Tungaloy 52 mm Dia. 3XD Indexable Insert Drill
52mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
Iscar 1.5 Dia. 2XD Indexable Square Insert Coolant Thru Drill
1-1/2″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
-
Tungaloy 40 mm Dia. 4XD Indexable Insert Drill
40mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 0.9252 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.925 (23.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 22.5 mm Dia. 3XD Indexable Insert Drill
22.5mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
-
Tungaloy 1.6250 Dia. 2XD Indexable Insert Drill
1-5/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
-
Ingersoll NPMX0803RG IN6542 Parallelogram Insert for BTA Heads, 0.008 in RE
INDEXABLE DRILLING/TURNING
-
Ingersoll 0.7087 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.709 (18.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|