Multi Insert
Showing 1751–1800 of 2555 results
-
Iscar 2.4803 Dia. DR Large Dia. Drills w/ Cartridges and One Flat Shank
2.48″ DR Large Diameter Drills (2.244-3.125″) with Cartridges and One Flat Shank
-
Nine N9MT05T1CT NC2071 Carbide Indexable Insert, 0.11 in DC, 0.016 in CR
INDEXABLE MILLING / INDEXABLE DRILLING
-
Tungaloy 22 mm Dia. 2XD Indexable Insert Drill
22mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
-
Tungaloy 45 mm Dia. 3XD Indexable Insert Drill
45mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.063 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.063 (27.00 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 1.281 Dia. 4XD Indexable Square Insert Coolant Thru Drill
1.281″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
-
Ingersoll 0.7087 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.709 (18.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Ingersoll 0.689 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.689 (17.50 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 0.9688 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
0.969 (24.61 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Nine N9MT0802M04C-NC2033 K20F Carbide Indexable Insert, 0.11 in DC
INDEXABLE MILLING / INDEXABLE DRILLING
-
Ingersoll 1.4375 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
1.437 (36.50 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Ingersoll 1.7812 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.781 (45.24 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
Tungaloy 44 mm Dia. 2XD Indexable Insert Drill
44mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
-
Tungaloy 0.8125 Dia. 2XD Indexable Insert Drill
0.812″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
Ingersoll 0.875 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.875 (22.23 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 1.0937 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.094 (27.79 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
-
-
Ingersoll 1.024 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.024 (26.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
Ingersoll 1.9291 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.929 (49.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 37 mm Dia. 5XD Indexable Insert Drill
37mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Iscar 0.5937 Dia. 3XD Indexable Square Insert Coolant Thru Drill
0.594″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
-
Tungaloy 14.5 mm Dia. 4XD Indexable Insert Drill
14.5mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
-
-
Ingersoll 0.5118 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.512 (13.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Ingersoll 0.9055 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.906 (23.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 1.6875 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.687 (42.85 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
-
Ingersoll 1.378 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.378 (35.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
