Multi Insert
Showing 1551–1600 of 2555 results
-
-
Ingersoll 1.3438 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.343 (34.11 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
-
-
-
-
Iscar 0.5625 Dia. 4XD Indexable Square Insert Coolant Thru Drill
0.562″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Ingersoll 1.6875 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.687 (42.85 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.5312 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
1.531 (38.89 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Tungaloy 41 mm Dia. 4XD Indexable Insert Drill
41mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
-
Tungaloy 28 mm Dia. 2XD Indexable Insert Drill
28mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
-
Ingersoll 1.5748 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.575 (40.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 30 mm Dia. 4XD Indexable Insert Drill
30mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Iscar 1.0156 Dia. 2XD Indexable Square Insert Coolant Thru Drill
1.062″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Tungaloy 1.2500 Dia. 2XD Indexable Insert Drill
1-1/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
-
Ingersoll 0.8858 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.886 (22.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Iscar 0.937 Dia. 2XD Indexable Square Insert Coolant Thru Drill
0.937″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
-
-
Ingersoll 0.7188 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
0.719 (18.26 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
-
Tungaloy 17.5 mm Dia. 2XD Indexable Insert Drill
17.5mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 1.5625 Dia. 4XD Indexable Insert Drill
1.562″ TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
-
-
-
-
Tungaloy 32 mm Dia. 3XD Indexable Insert Drill
32mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
Tungaloy 37 mm Dia. 4XD Indexable Insert Drill
37mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Tungaloy 50 mm Dia. 2XD Indexable Insert Drill
50mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 0.7500 Dia. 5XD Indexable Insert Drill
3/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
-
Ingersoll 1.4688 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
1.468 (37.29 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
-
Tungaloy 1.1250 Dia. 2XD Indexable Insert Drill
1-1/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
Tungaloy 38 mm Dia. 2XD Indexable Insert Drill
38mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 52 mm Dia. 3XD Indexable Insert Drill
52mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 0.5709 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.571 (14.50 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 1.5625 Dia. 3XD Indexable Insert Drill
1.562″ TungSix-Drill Indexable insert drills, L/D=3, Whistle notch
-
-
-
Tungaloy TDS Cartridge Set
TungDrillBig series, TDS cartridge set, L/D=2.5, dia=2.250 – 3.157inch, diameter adjustable with setting plate
-
-
Ingersoll 0.875 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.875 (22.23 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
