Multi Insert
Showing 951–1000 of 2555 results
-
-
-
Tungaloy 52 mm Dia. 2XD Indexable Insert Drill
52mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
-
Ingersoll 1.031 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.031 (26.19 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Tungaloy 33 mm Dia. 2XD Indexable Insert Drill
33mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
-
Tungaloy 32 mm Dia. 4XD Indexable Insert Drill
32mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
-
-
-
Tungaloy 21.5 mm Dia. 4XD Indexable Insert Drill
21.5mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 1.5312 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.531 (38.89 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Tungaloy 18 mm Dia. 4XD Indexable Insert Drill
18mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Tungaloy 1.5000 Dia. 4XD Indexable Insert Drill
1-1/2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
-
-
Iscar 0.374 Dia. Indexable Chamfering Drill Head Coolant Thru
0.374 Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
-
-
Iscar 1.25 Dia. 2XD Indexable Square Insert Coolant Thru Drill
1-1/4″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
-
-
Tungaloy 2.0000 Dia. 3XD Indexable Insert Drill
2″ TungSix-Drill Indexable insert drills, L/D=3, Whistle notch
-
-
-
Ingersoll 0.551 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.591 (15.01 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 15 mm Dia. 4XD Indexable Insert Drill
15mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
-
-
-
Ingersoll 1.7717 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.772 (45.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.5315 Dia. 2XD Indexable Square Insert Coolant Thru Drill
0.531″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Ingersoll 1.1811 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.181 (30.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Iscar 2 Dia. 4XD Indexable Square Insert Coolant Thru Drill
2″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
-
Ingersoll 3.25 Dia. Bright 4XD Large Diameter Indexable Coolant Thru Drill
3.250 (82.55 mm) Large Diameter Indexable Drills|L:D Ratio – 4:1|
-
-
-
Ingersoll 1.2992 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.299 (33.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.5312 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.531 (38.89 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Tungaloy 13.5 mm Dia. 4XD Indexable Insert Drill
13.5mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
-
-
Iscar 1.375 Dia. 2XD Indexable Square Insert Coolant Thru Drill
1-3/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
-
Iscar 2.25 Dia. 2XD Indexable Square Insert Coolant Thru Drill
2-1/4″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Ingersoll 0.9688 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.969 (24.61 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|