Multi Insert
Showing 51–100 of 2555 results
-
Tungaloy 0.9370 Dia. 5XD Indexable Insert Drill
0.937″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
Ingersoll 1.0039 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.004 (25.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 0.875 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
0.875 (22.23 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
-
Ingersoll 1.1875 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.187 (30.15 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.2188 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.219 (30.96 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Ingersoll 0.8438 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
0.843 (21.41 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
Tungaloy 26 mm Dia. 3XD Indexable Insert Drill
26mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
-
-
Ingersoll 1.125 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.125 (28.58 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
-
-
-
-
Tungaloy 1.5000 Dia. 4XD Indexable Insert Drill
1-1/2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
-
-
Iscar 2 Dia. 4XD Indexable Square Insert Coolant Thru Drill
2″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
-
-
-
Tungaloy 14.5 mm Dia. 3XD Indexable Insert Drill
14.5mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Tungaloy 21 mm Dia. 5XD Indexable Insert Drill
21mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
-
-
Ingersoll 1.2001 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.201 (30.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Tungaloy 30 mm Dia. 3XD Indexable Insert Drill
30mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
-
Ingersoll 1.1562 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
1.156 (29.36 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Ingersoll 2.875 Dia. Bright 2XD Large Diameter Indexable Coolant Thru Drill
2.875 (73.03 mm) Large Diameter Indexable Drills|L:D Ratio – 2:1|
-
-
-
Ingersoll 1.7717 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.772 (45.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.2992 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.299 (33.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Tungaloy 22 mm Dia. 2XD Indexable Insert Drill
22mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 24.5 mm Dia. 4XD Indexable Insert Drill
24.5mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 0.6875 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
0.688 (17.48 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Ingersoll 1.5 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.500 (38.10 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Iscar 0.5 Dia. 2XD Indexable Square Insert Coolant Thru Drill
1/2″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
-
Ingersoll 0.7676 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.768 (19.50 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 1.1417 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.142 (29.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|