Multi Insert
Showing 901–950 of 2555 results
-
-
Tungaloy TDS Cartridge Set
TungDrillBig series, TDS cartridge set, L/D=2.5, dia=2.250 – 3.157inch, diameter adjustable with setting plate
-
-
-
-
Tungaloy 12.5 mm Dia. 5XD Indexable Insert Drill
12.5mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
-
-
Iscar 1.375 Dia. 4XD Indexable Square Insert Coolant Thru Drill
1-3/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
-
-
-
Tungaloy 24 mm Dia. 4XD Indexable Insert Drill
24mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Tungaloy 18.5 mm Dia. 5XD Indexable Insert Drill
18.5mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Ingersoll 0.8071 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.807 (20.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
Tungaloy 1.1875 Dia. 2XD Indexable Insert Drill
1.187″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
Tungaloy 21 mm Dia. 3XD Indexable Insert Drill
21mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 0.9688 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
0.969 (24.61 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Tungaloy 1.1250 Dia. 3XD Indexable Insert Drill
1-1/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
Tungaloy 43 mm Dia. 4XD Indexable Insert Drill
43mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 0.748 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.748 (19.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
-
Tungaloy 14 mm Dia. 4XD Indexable Insert Drill
14mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
-
-
Ingersoll 0.6496 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.650 (16.50 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Tungaloy 1.4375 Dia. 2XD Indexable Insert Drill
1.437″ TungSix-Drill Indexable insert drills, L/D=2, Whistle notch
-
-
-
-
Tungaloy 1.9375 Dia. 4XD Indexable Insert Drill
1.937″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
-
-
Ingersoll 0.875 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
0.875 (22.23 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
-
-
-
-
-
Ingersoll 1.2992 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.299 (33.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 25 mm Dia. 3XD Indexable Insert Drill
25mm TungDrillTwisted Indexable insert drills with “TungCap” Exchangeable Shanks, L/D=3
-