Multi Insert
Showing 651–700 of 2555 results
-
Iscar 0.875 Dia. 3XD Indexable Square Insert Coolant Thru Drill
7/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Iscar 0.6562 Dia. 4XD Indexable Square Insert Coolant Thru Drill
0.656″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Ingersoll 1.6535 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.654 (42.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 37 mm Dia. 5XD Indexable Insert Drill
37mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Tungaloy 37 mm Dia. 3XD Indexable Insert Drill
37mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Iscar 1.625 Dia. 2XD Indexable Square Insert Coolant Thru Drill
1-5/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
-
-
-
-
-
-
Ingersoll 1.811 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.811 (46.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Tungaloy 16.5 mm Dia. 5XD Indexable Insert Drill
16.5mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
-
-
-
Tungaloy 24 mm Dia. 2XD Indexable Insert Drill
24mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
-
-
-
-
-
-
-
Ingersoll 1.5625 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.562 (39.67 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.687 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.687 (42.85 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
Tungaloy 1.6250 Dia. 3XD Indexable Insert Drill
1-5/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
-
Ingersoll 1.75 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.750 (44.45 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 0.7500 Dia. 3XD Indexable Insert Drill
3/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
Ingersoll 0.8465 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.847 (21.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 1.5000 Dia. 2XD Indexable Insert Drill
1-1/2″ TungSix-Drill Indexable insert drills, L/D=2, Whistle notch
-
Tungaloy 0.5000 Dia. 4XD Indexable Insert Drill
1/2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
-
Ingersoll 0.5315 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.531 (13.49 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
-
Ingersoll 2.5 Dia. Bright 4XD Large Diameter Indexable Coolant Thru Drill
2.500 (63.50 mm) Large Diameter Indexable Drills|L:D Ratio – 4:1|
-
-
Ingersoll 0.813 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
0.813 (20.65 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
-
-
-
-
-
