job shop
Showing 4901–4950 of 43236 results
-
Advent Tool 11 Pitch AlTiN BSPP Thread Mill Insert
External Thread, Neutral Face, 1.5″ LOC , 0.31″ Height, 0.13″Thick EDP# 51461, P/N ATM-410A11BSPV, 11-BSPP, AlTiN Coating
-
-
-
HAM 4.3 mm Dia. 137 TA-C Coolant Thru Drill
4.30 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
YG-1 11.3 mm Dia. 118 Carbide DLC 5XD Coolant Thru Drill
11.30MM CARBIDE DREAM DRILL FOR ALUMINUM W/ COOLANT (5XD) – METRIC
-
-
-
-
Iscar 0.4219 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.421″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
HAM 3.8 mm Dia. 120 TA Non-Coolant Thru Drill
3.80 mm Solid Carbide Twist Drill, 2 Flute, TA Coated, Non-Coolant
-
YG-1 0.6406 Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
41/64 CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
-
-
YG-1 9.8 mm Dia. 140 Carbide TiAlN 8XD Coolant Thru Drill
9.80MM CARBIDE DREAM DRILL INOX W/ COOLANT (8XD)
-
-
YG-1 57 mm Dia. 132 HSS TiAlN Throw Away Drill Insert
57.00MM SUPER HSS(T15) SM POINT THROW-AWAY DRILL Insert TIALN COATED
-
-
-
YG-1 7.2 mm Dia. 140 Carbide TiAlN+TiN 5XD Coolant Thru Drill
7.20MM CARBIDE DREAM DRILL HIGH FEED 5XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
-
-
YG-1 1.7812 Dia. 132 HSS Hardslick Throw Away Drill Insert
1-25/32 HSS(M4) THROW-AWAY DRILL Insert HARDSLICK COATED
-
Iscar 0.5906 Dia. Tube Coolant Thru Drill
0.591″ Deep Single Tube Counterbore with Through Hole, Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
-
-
-
-
-
HAM 2.1 mm Dia. 130 Bright Non-Coolant Thru Drill
2.10 mm Solid Carbide Twist Drill, 2 Flutes, AMS Geometry, Bright, Non-Coolant
-
Tungaloy 12.5 mm Dia. TiAlN 3XD Coolant Thru Drill
12.5 mm GigaJetDrill series with coolant hole, L/D=3, dia=3.0 – 20.0mm
-
HAM 11.8 mm Dia. 140 TA-C Coolant Thru Drill
11.80 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
Iscar 0.4134 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.413″ Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)
-
-
Advent Tool 8 Pitch TiAlN NPTF Thread Mill Insert
External Thread, Neutral Face, 1.5″ LOC , 0.375″ Height, 0.13″Thick EDP# 51222, P/N ATM-410A8NPTFZ, 8-NPTF, TiAlN Coating
-
Tungaloy 8.2 mm Dia. TiAlN 3XD Coolant Thru Drill
8.2 mm GigaJetDrill series with coolant hole, L/D=3, dia=3.0 – 20.0mm
-
Iscar 0.5906 Dia. Carbide TiAlN+TiN Exchangeable Drill Heads Coolant Thru
.591″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
-
YG-1 1.5000 Dia. 132 Carbide Hardslick Throw Away Drill Insert
1-1/2 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
YG-1 7.8 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
7.80MM CARBIDE DREAM DRILL INOX W/ COOLANT (5XD)
-
Iscar 5.8661 Dia. Drill Tube System Coolant Thru
5.866 – 6.378″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
Tungaloy 4.3 mm Dia. TiAlN 3XD Coolant Thru Drill
4.3 mm GigaJetDrill series with coolant hole, L/D=3, dia=3.0 – 20.0mm
-
YG-1 4.0625 Dia. 144 HSS TiAlN Throw Away Drill Insert
4-1/16 HSS(M4) THROW AWAY DRILL Insert TIALN-COATED
-
-
YG-1 18.5 mm Dia. 140 Carbide TiAlN 3XD, 5XD, 7XD Drill Insert Coolant Thru
18.50MM I-DREAMDRILL Insert TIALN-COATED #D
-
-
HAM 4.4 mm Dia. 140 TA-C Coolant Thru Drill
4.40 mm 8XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru