job shop
Showing 36201–36250 of 43236 results
-
-
-
Iscar 3.8976 Dia. Tube Coolant Thru Drill
3.898″ Deep Single Tube Drills with Internal Single Start Thread and Cartridges (1.142-9.685 dia.)
-
Iscar 0.5156 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.516″ DCM Drill Heads for Cast Iron
-
-
HAM 13.2 mm Dia. 140 TA-CN Coolant Thru Drill
13.20 mm 5XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-
-
-
-
Iscar 0.4882 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.488″ DCM Drill Heads for Cast Iron
-
-
-
-
-
-
YG-1 0.4687 Dia. 132 HSS Hardslick Throw Away Drill Insert
15/32 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
HAM 3.6 mm Dia. 140 TA-C Coolant Thru Drill
3.60 mm 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
YG-1 16 mm Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
16.00MM CARBIDE DREAM DRILL INOX W/ COOLANT (3XD)
-
-
-
Iscar 0.5709 Dia. Tube Counterbore Coolant Thru
0.571″ Deep Single Tube Counterbore Without a Through Hole, Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
-
-
-
Iscar 0.4803 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.480″ General Use DCM Drill Heads
-
HAM 5.4 mm Dia. 140 TA-CN Non-Coolant Thru Drill
5.40 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
Iscar 1.7323 Dia. Tube Coolant Thru Drill
1.732″ Deep Single Tube Drills with Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
-
YG-1 70 mm Dia. 144 HSS Hardslick Throw Away Drill Insert
70.00MM SUPER HSS(T15) THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
Iscar 1.2598 Dia. Drill Tube System Coolant Thru
1.260 – 1.338″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
YG-1 4.2500 Dia. 144 HSS Hardslick Throw Away Drill Insert
4-1/4 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
-
-
YG-1 26.01 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
26.00MM CARBIDE (C5) THROW-AWAY DRILL Insert TIALN-COATED
-
Iscar 0.8661 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.866″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
YG-1 1.2500 Dia. 132 HSS Hardslick Throw Away Drill Insert
1-1/4 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
YG-1 1.9688 Dia. 132 Cobalt Hardslick Throw Away Drill Insert
1-31/32 PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
HAM 10.5 mm Dia. 120 TA Non-Coolant Thru Drill
10.50 mm Solid Carbide Twist Drill, 2 Flute, TA Coated, Non-Coolant
-
Advent Tool 27 Pitch TiAlN UN Thread Mill Insert
External Thread, Neutral Face, 1.5″ LOC , 0.25″ Height, 0.093″Thick EDP# 50262, P/N ATM-38B27Z, 27-UN, TiAlN Coating
-
-
HAM 6 mm Dia. kevlar Bright Non-Coolant Thru Drill
6.00 mm Solid Carbide Twist Drill, 2 Flutes, Special Point Grind, Bright, Non-Coolant
-
Tungaloy 0.7480 Dia. TiAlN DMP Drill Head
0.748″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
-
Iscar 0.878 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.878″ General Use DCM Drill Heads
-