job shop
Showing 3501–3550 of 43236 results
-
-
YG-1 9.4 mm Dia. 140 Carbide TiAlN 10XD Coolant Thru Drill
9.40MM CARBIDE DRILL MQL TYPE W/ COOLANT (10XD)
-
-
-
YG-1 0.7344 Dia. 132 Carbide TiAlN Throw Away Drill Insert
47/64 CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
Tungaloy 1.5000 Dia. 5XD Indexable Insert Drill
1-1/2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
Tungaloy 1.1024 Dia. 25XD Drill Body
28mm Drill body for cross holes for lathes and machining centers, L/D = 25. For drilling cross holes.
-
-
-
-
-
Advent Tool 1.50 mm Pitch AlTiN ISO Thread Mill Insert
External Thread, Neutral Face, 1.5″ LOC , 0.25″ Height, 0.093″Thick EDP# 50694, P/N ATM-38B1.5MMNT, 1.5-ISO, AlTiN Coating
-
-
Advent Tool 14 Pitch AlTiN NPTF Thread Mill Insert
External Thread, Neutral Face, 1″ LOC , 0.31″ Height, 0.093″Thick EDP# 51149, P/N ATM-38A14NPTFV, 14-NPTF, AlTiN Coating
-
Iscar 0.7716 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.772″ General Use DCM Drill Heads
-
YG-1 0.5781 Dia. 132 HSS Hardslick Throw Away Drill Insert
37/64 SUPER HSS(T15) THROW AWAY DRILL Insert HARDSLICK COATED
-
HAM 5 mm Dia. 140 TA Coolant Thru Drill
5.00 mm 3XD Solid Carbide Multi Drill, 2 Straight Flutes, TA Coated, Coolant Thru
-
HAM 1.2 mm Dia. 120 Bright Non-Coolant Thru Drill
1.20 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
HAM 2.8 mm Dia. 120 Bright Non-Coolant Thru Drill
2.80 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
YG-1 1.1094 Dia. 118 HSS Oxide Morse Taper Shank Non-Coolant Thru Drill
1-7/64 HSS(M2) MORSE TAPER SHANK TWIST DRILLS
-
-
-
-
HAM 10.8 mm Dia. 137 TA-C Coolant Thru Drill
10.80 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
HAM 9.9 mm Dia. 137 TA-C Coolant Thru Drill
9.90 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
HAM 1.95 mm Dia. 135 TA Coolant Thru Drill
1.95 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
-
-
YG-1 0.2420 Dia. 135 HSS Split Point Aircraft Non-Coolant Thru Drill
C HSS 6″ AIRCRAFT EXTENSION DRILL 135 DEGREE SPLIT POINT STEAM HOMO
-
Advent Tool 3.00 mm Pitch TiAlN ISO Thread Mill Insert
External Thread, 5? Positive Rake, 1.5″ LOC , 0.375″ Height, 0.13″Thick EDP# 50791, P/N ATM-410A3.0MMPZ, 3.0-ISO, TiAlN Coating
-
-
-
-
-
Iscar 1.0866 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
1.086″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
-
-
-
HAM 4.3 mm Dia. 137 TA-C Coolant Thru Drill
4.30 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 4.6 mm Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
4.60MM DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
HAM 1.05 mm Dia. 135 TA Coolant Thru Drill
1.05 mm 12XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
HAM 15.2 mm Dia. 140 TA-CN Coolant Thru Drill
15.20 mm 5XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-
-
-
-
HAM 2.65 mm Dia. 140 TA Non-Coolant Thru Drill
2.65 mm Solid Carbide Twist Drill, 2 Flutes, TA Coated, Non-Coolant
-
-
Advent Tool 11 Pitch AlTiN UN Thread Mill Insert
External Thread, 5? Positive Rake, 1″ LOC , 0.25″ Height, 0.093″Thick EDP# 50066, P/N ATM-38A11PV, 11-UN, AlTiN Coating
-
Iscar 0.5591 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.559″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)