Holemaking
Showing 46751–46800 of 47158 results
-
-
Iscar 0.4528 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.453″ DCM Drill Heads for Cast Iron
-
-
YG-1 27 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
27.00MM CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
Tungaloy 1.8125 Dia. 3XD Indexable Insert Drill
1.812″ TungSix-Drill Indexable insert drills, L/D=3, Whistle notch
-
-
Ingersoll 0.6574 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.658 (16.71 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
HAM 11.5 mm Dia. 140 TA-C Coolant Thru Drill
11.50 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
HAM 1.55 mm Dia. 135 TA Coolant Thru Drill
1.60 mm 8XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
-
YG-1 0.6406 Dia. 132 HSS TiAlN Throw Away Drill Insert
41/64 SUPER HSS(T15) THROW-AWAY DRILL Insert TIALN COATED
-
HAM 13.8 mm Dia. 140 TA-C Coolant Thru Drill
13.80 mm 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 0.4687 Dia. 118 Carbide TiAlN Jobber Non-Coolant Thru Drill
15/32 CARBIDE JOBBER LENGTH TWIST DRILL TIALN COATED
-
-
-
-
YG-1 0.2187 Dia. 140 Carbide TiAlN 5XD Non-Coolant Thru Drill
7/32 CARBIDE DREAM DRILL W/O COOLANT HOLES (5XD)
-
YG-1 0.272 Dia. 140 Carbide TiAlN+TiN 3XD Coolant Thru Drill
.2720 CARBIDE DREAM DRILL HIGH FEED 3XD W/ COOLANT HOLE SLOT (H-COATING)
-
-
-
YG-1 1.1562 Dia. 118 HSS Oxide Morse Taper Shank Non-Coolant Thru Drill
1-5/32 HSS(M2) MORSE TAPER SHANK TWIST DRILLS
-
Iscar 0.3976 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.398″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
HAM 2.7 mm Dia. 135 TA-C Coolant Thru Drill
2.70 mm 30XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
HAM 10.6 mm Dia. 137 TA-C Coolant Thru Drill
10.60 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 12.5 mm Dia. 132 Cobalt Hardslick Throw Away Drill Insert
12.50MM PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
HAM 12.6 mm Dia. 140 TA-C Coolant Thru Drill
12.60 mm 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
YG-1 0.2460 Dia. 135 Cobalt Bright Screw Machine Non-Coolant Thru Drill
D HSS(M42) SCREW MACHINE DRILL
-
-
-
YG-1 21 mm Dia. 132 Cobalt Hardslick Throw Away Drill Insert
21.00MM PREMIUM COBATL(M48) THROW-AWAY DRILL InsertS HARDSLICK COATED
-
HAM 13.2 mm Dia. 137 TA-C Coolant Thru Drill
13.20 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 97.99 mm Dia. 144 Cobalt Hardslick Throw Away Drill Insert
98.00MM PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
YG-1 10.2 mm Dia. 132 HSS Hardslick Throw Away Drill Insert
10.20MM SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
HAM 8.5 mm Dia. 137 TA-C Coolant Thru Drill
8.50 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Ingersoll 0.7087 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.709 (18.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
YG-1 0.5000 Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
12.70MM CARBIDE DREAM DRILL W/ COOLANT (3XD)
-
-
Tungaloy 10.1 mm Dia. TiAlN 3XD Coolant Thru Drill
10.1 mm GigaJetDrill series with coolant hole, L/D=3, dia=3.0 – 20.0mm
-
YG-1 1.4062 Dia. Series 3 Straight Shank & Flute Spade Holder
SERIES 3 STRAIGHT SHANK & STRAIGHT FLUTE MEDIUM LENGTH SPADE DRILL HOLDER
-
YG-1 7.2 mm Dia. 118 Carbide DLC 5XD Coolant Thru Drill
7.20MM CARBIDE DREAM DRILL FOR ALUMINUM W/ COOLANT (5XD) – METRIC
-
