Holemaking
Showing 45501–45550 of 47158 results
-
-
-
-
-
-
YG-1 0.2812 Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
9/32 CARBIDE DREAM DRILL INOX W/ COOLANT (5XD)
-
-
-
Iscar 1.2401 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
1.244″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
HAM 11.91 mm Dia. 140 TA-C Coolant Thru Drill
15/32″ 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Ingersoll 1.5625 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.562 (39.67 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
HAM 3.6 mm Dia. 130 Bright Non-Coolant Thru Drill
3.60 mm Solid Carbide Twist Drill, 2 Flutes, AMS Geometry, Bright, Non-Coolant
-
Ingersoll 1.6142 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.614 (41.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
YG-1 0.4606 Dia. 130 TiN Stub Non-Coolant Thru Drill
11.7MM HSS-EX HPD-SUS TWIST DRILL TiN-COATED (STUB)
-
Ingersoll 0.75 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.750 (19.05 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 0.4646 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.4646 (11.80 mm) Gold Twist Replaceable Tips|Stainless Steel & Exoti
-
-
YG-1 0.6250 Dia. 118 Carbide DLC 5XD Coolant Thru Drill
5/8 CARBIDE DREAM DRILL FOR ALUMINUM W/ COOLANT (5XD)
-
-
-
-
-
YG-1 0.4219 Dia. 135 Cobalt Split Point Aircraft Non-Coolant Thru Drill
27/64 HSSCo5 6″ AIRCRAFT EXTENSION DRILL 135 DEGREE SPLIT POINT COLORING
-
-
-
-
-
-
-
Iscar 0.5787 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.579″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
-
YG-1 0.3125 Dia. 130 Cobalt TiCN Parabolic Taper Non-Coolant Thru Drill
5/16 HSSCo5 PARABOLIC FLUTE TAPER LENGTH STRAIGHT SHANK DRILL TICN COATED
-
YG-1 13.5 mm Dia. 140 Carbide TiAlN 10XD Coolant Thru Drill
13.50MM CARBIDE DREAM DRILLS MQL TYPE W/ COOLANT HOLES (10XD)
-
YG-1 16.4 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
16.40MM CARBIDE DREAM DRILL INOX W/ COOLANT (5XD)
-
-
-
-
-
-
-
-
-
-
Iscar 1.1772 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
1.177″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
-
YG-1 1.2812 Dia. Flat HSS TiN Throw Away Drill Insert
1-9/32 SUPER HSS (T15) FLAT BOTTOM DRILL Insert TIN COATED
-
-
YG-1 2.4375 Dia. 132 HSS Hardslick Throw Away Drill Insert
2-7/16 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED