drill
Showing 34751–34800 of 36278 results
-
-
-
YG-1 3.8 mm Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
3.80MM DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
-
-
-
-
HAM 11 mm Dia. 137 TA-C Coolant Thru Drill
11.00 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 64.01 mm Dia. 144 Cobalt Hardslick Throw Away Drill Insert
64.00MM PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
Iscar 9.1339 Dia. Drill Tube System Coolant Thru
9.134 – 9.606″ Drill Tubes – STS System – Inner 4 Start Thread Connection
-
-
YG-1 9.6 mm Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
9.60MM DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
-
-
HAM 9.6 mm Dia. 137 TA-C Coolant Thru Drill
9.60 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
YG-1 3.6250 Dia. 144 HSS Hardslick Throw Away Drill Insert
3-5/8 HSS(M4) THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
HAM 13 mm Dia. 135 TA Coolant Thru Drill
13.00 mm 12XD Solid Carbide Multi Drill, 2 Straight Flutes, TA Coated, Coolant Thru
-
-
-
-
YG-1 2.4687 Dia. 132 HSS TiAlN Throw Away Drill Insert
2-15/32 SUPER HSS(T15) SM POINT THROW-AWAY DRILL Insert TIALN COATED
-
HAM 12.4 mm Dia. 137 TA-C Coolant Thru Drill
12.40 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
HAM 3.18 mm Dia. 137 TA-C Coolant Thru Drill
1/8″ 25XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
HAM 16.5 mm Dia. 140 TA-C Non-Coolant Thru Drill
16.50 mm 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
-
-
-
-
-
-
YG-1 0.5469 Dia. 118 HSS Oxide Morse Taper Shank Non-Coolant Thru Drill
35/64 HSS(M2) MORSE TAPER SHANK TWIST DRILLS
-
Iscar 1.4252 Dia. Tube Counterbore Coolant Thru
1.426″ Deep Single Tube Counterbore with Through Hole, External 4 Start Thread and a Brazed Tip (.744-2.559 dia.)
-
HAM 14.29 mm Dia. 140 TA-C Coolant Thru Drill
9/16″ 8XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
HAM 15.1 mm Dia. 140 TA-CN Coolant Thru Drill
15.10 mm 8XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
HAM 2.1 mm Dia. 130 Bright Non-Coolant Thru Drill
2.10 mm Solid Carbide Twist Drill, 2 Flutes, AMS Geometry, Bright, Non-Coolant
-
-
-
YG-1 0.4844 Dia. 135 Cobalt Split Point Aircraft Non-Coolant Thru Drill
31/64 HSSCo5 6″ AIRCRAFT EXTENSION DRILL 135 DEGREE SPLIT POINT COLORING