drill
Showing 31451–31500 of 36278 results
-
HAM 8.33 mm Dia. 137 TA-C Coolant Thru Drill
21/64″ 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
YG-1 27 mm Dia. 132 HSS TiN Throw Away Drill Insert
27.00MM HSS(M4) THROW AWAY DRILL Insert TIN-COATED
-
-
YG-1 94.01 mm Dia. 144 HSS Hardslick Throw Away Drill Insert
94.00MM SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
HAM 14.6 mm Dia. 140 TA-C Coolant Thru Drill
14.60 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 0.7031 Dia. Series 1 Straight Shank & Flute Spade Holder
SERIES 1 STRAIGHT SHANK & STRAIGHT FLUTE STANDARD LENGTH SPADE DRILL HOLDER
-
YG-1 9 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
9.00MM CARBIDE DREAM DRILL W/ COOLANT (5XD) – METRIC
-
-
Iscar 1.693 Dia. Tube Counterbore Coolant Thru
1.693″ Deep Single Tube Counterbore with Through Hole, External 4 Start Thread and a Brazed Tip (.744-2.559 dia.)
-
-
YG-1 17.3 mm Dia. 140 Carbide TiAlN 3XD Non-Coolant Thru Drill
17.30MM CARBIDE DREAM DRILL W/O COOLANT HOLES (3XD)
-
-
-
Iscar 0.611 Dia. Tube Coolant Thru Drill
0.611″ Deep Single Tube Drills with Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
YG-1 8.9 mm Dia. 140 Carbide TiAlN 3XD Non-Coolant Thru Drill
8.90MM CARBIDE DREAM DRILL W/O COOLANT HOLES (3XD)
-
YG-1 0.5312 Dia. 118 HSS Oxide Morse Taper Shank Non-Coolant Thru Drill
17/32 HSS(M2) MORSE TAPER SHANK TWIST DRILLS
-
-
YG-1 0.5781 Dia. 132 Carbide Hardslick Throw Away Drill Insert
37/64 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
-
HAM 9.92 mm Dia. 137 TA-C Coolant Thru Drill
25/64″ 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Iscar 0.5906 Dia. Tube Counterbore Coolant Thru
0.591″ Deep Single Tube Counterbore Without a Through Hole, Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
STI 17.86 mm Dia. 130 TiAlN Carbide 5-8XD Non-Coolant Thru Drill
17.86 MM DIA 3 FLUTE NON COOLANT TIALN
-
-
-
-
HAM 8.6 mm Dia. 137 TA-C Coolant Thru Drill
8.70 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
YG-1 19 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
19.00MM CARBIDE DREAM DRILL W/ COOLANT (5XD) – METRIC
-
-
-
-
-
HAM 1.8 mm Dia. 130 Bright Non-Coolant Thru Drill
1.70 mm Solid Carbide Twist Drill, 2 Flutes, AMS Geometry, Bright, Non-Coolant
-
HAM 11.4 mm Dia. 140 TA-CN Non-Coolant Thru Drill
11.40 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
YG-1 0.7031 Dia. 132 HSS Hardslick Throw Away Drill Insert
45/64 SUPER HSS(T15) THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
YG-1 1.0625 Dia. 118 HSS Oxide Morse Taper Shank Non-Coolant Thru Drill
1-1/16 HSS(M2) MORSE TAPER SHANK TWIST DRILLS
-
YG-1 0.6406 Dia. 132 Carbide TiN Throw Away Drill Insert
41/64 CARBIDE (C5) THROW-AWAY DRILL Insert TIN-COATED
-
-
YG-1 10 mm Dia. 132 HSS Hardslick Throw Away Drill Insert
10.00MM SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
YG-1 0.2795 Dia. 135 Cobalt TiN Straight Shank Jobber Non-Coolant Thru Drill
7.1 HSS-Co5% JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
-
