YG-1 1.2500 in or 31.7500 mm Corner Radius Powder Metal Uncoated 3 Flute End Mill

Size: 1-1/4 x 1.25 x 6 x 8.5

Description

General

The Yg-1 Asp is a Extra Long length UNCOATED coated corner radius Powder Metal Bull Nose Rougher. It has a single end, and a weldon flat shank. This mill is capable of cutting ALUMINUM,PLASTIC For further size a specification data, please view the Additional Information Tab

Features and Benefits

UNCOATED

UNCOATED is as it states no coating. This tool still has many benefits over a coated tool. All coating put heat in the tool causing them to become more brittle. Long reach small diameter tools many times perform better uncoated as they dont snap as easily. Applications were coatings may leave partials in the part. J polished tools coatings tend not to adhere to showing very little benefit in tool life. Micro tooling where surface footage is never going to be achieved. Cost is not much different today but there is still a small up charge for coating.

Advatages to Powder Metal

Powder Metal falls between Carbiden and Cobalt on the hardness scale. Particals can can be up to 78HRc but average hardness is 73HRc. Powder metal come in many different blends and is used when carbide is fracturing and Cobalt is wearing from heat. This is a great alternative to carbide as it can be ground to very sharp edge do to its small partical density. It can take high load cutting at close to carbide surface footage. It excells in high temp alloy machining as with its ability to have sharp edge and toughness in high tensile strengh aplications. It is used many times in aplications wear machine tool cant acheive recomended surface footage for carbide.

Industries used in

Job Shop,Energy Mfg,Mold/Die,Automotive,Agriculture

Shipping

Ships From: ILLINOIS

Additional information

Flutes

3

Single/Double End

Single End

Brand

YG-1

Model

ASP

Material Cut Rating

ALUMINUM, PLASTIC

Ships From

ILLINOIS

Cutting Diameter (DC)

1.2500 in || 31.7500 mm

Shank Diameter

1.2500 in || 31.7500 mm

Length of Cut (LB)

6.0000 in || 152.4000 mm

Overall Length (LF)

8.5000 in || 215.9000 mm

End/Corner Shape

Corner Radius

Shank Style

WELDON FLAT

Corner Radius

0.0600 in || 1.5240 mm

Tool Length

EXTRA LONG

Material

POWDER METAL

Cutter Style

Bull Nose Rougher

Helix Angle

42

INCH/METRIC

INCH

Industry

AGRICULTURE, AUTOMOTIVE, ENERGY MFG, JOB SHOP, MOLD/DIE

Center Cutting?

Yes

Coating

Uncoated

Reviews

There are no reviews yet.

Be the first to review “YG-1 1.2500 in or 31.7500 mm Corner Radius Powder Metal Uncoated 3 Flute End Mill”