Yg-1 0.3437 in or 8.7300 mm Square Cobalt Tin 2 Flute End Mill

Size: 11/32 x 0.375 x 0.5625 x 3.125

Description

General

The Yg-1 Genral Purpose is a Standard length TiN coated square Cobalt Finisher. It has a double end, and a weldon flat shank. This mill is capable of cutting Steel 20 – 40 HRc,IRON,STAINLESS For further size a specification data, please view the Additional Information Tab

Features and Benefits

Why use TIN

Tin should be used in low surface foot or low heat cutting. It is a great top coating for many other coatings. It gives the best view of wear, making it an operators first choice if possible. Good for tools that taper were surface footage is low or fricion with limited heat may occur.

Advantages to Cobalt

Cobalt is extremly versitile and is used on matirials up to 40HRc as it is 68HRc making it the second toughest substrate. Cobalt can be used on almost all matirials. It should be used when carbide chips or when High Speed wears out quickly. Cobalt performs extremly well on high tensile strength matirials, wear high cutting forces fracture carbide.

Industries used in

Job Shop

Shipping

Ships From: ILLINOIS

Additional information

Flutes

2

Single/Double End

Double End

Brand

YG-1

Model

Genral Purpose

Material Cut Rating

IRON, STAINLESS, Steel 20 – 40 HRc

Ships From

ILLINOIS

Cutting Diameter (DC)

0.3437 in || 8.7300 mm

Shank Diameter

0.3437 in || 8.7300 mm

Length of Cut (LB)

0.5625 in || 14.2875 mm

Overall Length (LF)

3.1250 in || 79.3750 mm

End/Corner Shape

SQUARE

Shank Style

WELDON FLAT

Corner Radius

Sharp

Tool Length

STANDARD

Material

Cobalt

Cutter Style

Finisher

Helix Angle

30

INCH/METRIC

INCH

Industry

JOB SHOP

Coating

TiN

Reviews

There are no reviews yet.

Be the first to review “Yg-1 0.3437 in or 8.7300 mm Square Cobalt Tin 2 Flute End Mill”